Plantronics + Polycom. Now together as Poly Logo

Phone Not Able to Register Upon Disconnection and Reconnect to Network

Highlighted
Occasional Advisor

Phone Not Able to Register Upon Disconnection and Reconnect to Network

Hi Support,

 

I am facing issue with my Polycom VVX 310 where by configuring static IP for my phone, and connecting it to the access switch to the gateway, I am able to register and perform phone calls However, upon disconnecting the phone for some time (more than 2 hours) and reconnecting back to the same network with the same phone static IP, the phone will face register fail issue and will only able to register after disconnected for 2 weeks.

 

Kindly please advise is there any othe rclient who faced the similar issue? Might this could be related with the dhcp lease time configured in the Cisco routers?

 

Thanks

Message 1 of 2
1 REPLY 1
Highlighted
Polycom Employee & Community Manager

Re: Phone Not Able to Register Upon Disconnection and Reconnect to Network

Hello ks,

welcome back to the Polycom Community.

 

Please be aware that this is not a replacement for the Polycom support infrastructure and questions posted here do not follow Polycom’s SLA guidelines.

 

If you require assistance from Polycom technical support, please open a web service request or call us.

The community's VoIP FAQ contains this post here:

 

Jan 19, 2012 Question: How to troubleshoot Polycom VoIP related Issues?

Resolution: Please check => here <=


Above FAQ post explains how to troubleshoot network related issues.


Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services

----------------

Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.
Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's
Message 2 of 2