I'm trying to get a VVX400 to auto answer from broadsoft. I registered a 650 on 3.1.3c with the same account and the same invite does auto answer.
The invite includes this line: Call-Info:<sip:188.8.131.52>;answer-after=0
Its not coming in as an alert-info but rather Call-info. How can I get my VVX400 running 4.1.4 to recognise this and answer the call?
650 is using:
I have tried many variations of value and class on the vvx.
Not sre if this helps but we set auto answer SIP calls in the phone%BWDEVICEID%.cfg:
<call.autoAnswer.SIP call.autoAnswer.SIP="%AUTO_ANSWER_SIP%" />
Then added a tag under polycom tag sets default set to 0 (off)
Then under the user add the tag with a value of 1 which overides the system default.
Hope this helps somewhat....
welcome back to the Polycom Community.
The community's VoIP FAQ contains this post here:
Oct 25, 2011 Question: How can I change my Ringtone or Ring in a special manner for a certain incoming call?
Resolution: Please check => here <=
Since UCS some parameters have changed and you may want to try voIpProt.SIP.alertInfo.4.class="answer"/> instead of voIpProt.SIP.alertInfo.4.class="3"/>.
You could also try UCS 4.1.5 or even 5.0.1 and ensure you check the phone logs as well.
If this still fails please work with your Polycom reseller and/or Polycom support directly and quote VOIP-68300 which was an issue in the past.
Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.
Polycom Global Services