Plantronics + Polycom. Now together as Poly Logo

Polycom 430 config entries - hostmovedetect and eapollogoff

SOLVED
Highlighted
Valued Contributor

Polycom 430 config entries - hostmovedetect and eapollogoff

Hi guys

 

A very quick question - are the following set in the Polycom config for sip versions 3.2.7 or 3.2.2 for the 430's?  I cannot see any entries for them in the Admin guides but thought they may have still been added?:

 

sec.dot1x.eapollogoff.enabled

sec.dot1x.eapollogoff.lanlinkreset

sec.hostmovedetect.cdp.enabled

sec.hostmovedetect.cdp.sleepTime

 

Cheers

 

Dave

Message 1 of 3
2 REPLIES 2
Polycom Employee & Community Manager

Re: Polycom 430 config entries - hostmovedetect and eapollogoff

Hello Dave,

welcome back to the Polycom Community.

Certain functions are added over the years and depend on the compatibility of the product in regards to the software released.

 

These features where added in UC Software 4.0.0 and are therefore not applicable to the SPIP430

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services




<======== Signature / Disclaimer ========>
Please be aware:For questions about the type of support to expect please check here

Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

The title Polycom Employee & Community Manager is an automatic setting within the community and any forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Poly employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and maybe answered on weekends, bank holidays or personal holidays.
Message 2 of 3
Valued Contributor

Re: Polycom 430 config entries - hostmovedetect and eapollogoff

Hi Steffen

 

Thanks for the clarification on this - great stuff...

 

Cheers

 

Dave

Message 3 of 3