Plantronics + Polycom. Now together as Poly Logo

Polycom 430 config entries - hostmovedetect and eapollogoff

SOLVED
Highlighted
Valued Contributor

Polycom 430 config entries - hostmovedetect and eapollogoff

Hi guys

 

A very quick question - are the following set in the Polycom config for sip versions 3.2.7 or 3.2.2 for the 430's?  I cannot see any entries for them in the Admin guides but thought they may have still been added?:

 

sec.dot1x.eapollogoff.enabled

sec.dot1x.eapollogoff.lanlinkreset

sec.hostmovedetect.cdp.enabled

sec.hostmovedetect.cdp.sleepTime

 

Cheers

 

Dave

Message 1 of 3
1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Polycom Employee & Community Manager

Re: Polycom 430 config entries - hostmovedetect and eapollogoff

Hello Dave,

welcome back to the Polycom Community.

Certain functions are added over the years and depend on the compatibility of the product in regards to the software released.

 

These features where added in UC Software 4.0.0 and are therefore not applicable to the SPIP430

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services

----------------

Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.
Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

View solution in original post

Message 2 of 3
2 REPLIES 2
Highlighted
Polycom Employee & Community Manager

Re: Polycom 430 config entries - hostmovedetect and eapollogoff

Hello Dave,

welcome back to the Polycom Community.

Certain functions are added over the years and depend on the compatibility of the product in regards to the software released.

 

These features where added in UC Software 4.0.0 and are therefore not applicable to the SPIP430

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services

----------------

Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.
Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

View solution in original post

Message 2 of 3
Valued Contributor

Re: Polycom 430 config entries - hostmovedetect and eapollogoff

Hi Steffen

 

Thanks for the clarification on this - great stuff...

 

Cheers

 

Dave

Message 3 of 3