Hello GaryDenver,
Configuration on the Polycom® Phone Menu:
• Press the Menu Button
• Choose (3) Settings
• Choose (2) Advanced
• Password is 456
• Choose (1) Admin Settings
• Choose (2) SIP Configuration
• Select Server and add the IP Address or FQDN of the SIP Provider
Confirm this selection and scroll down to Line1:
• Enter a Display Name
• Add the SIP Extension/Username as the Address
• Add the SIP Extension/Username as the Auth User ID
• Add the Password
• Optional add a Label that will be displayed next to the Line Key
• Press exit until the Prompt comes to save the Settings and the Phone will reboot after this
Configuration via the Polycom® Phone Web interface:
Browse to the Phones Web Server
Username: Polycom
Password: 456
Line Settings:
· Add the SIP Extension/Username as the Address
· Add SIP Extension/Username as the Auth User ID
· Add the Auth Password
Sip Server Settings:
Just add the IP Address or FQDN of the SIP Provider in the Server 1 Selection
Best Regards
Steffen Baier
<======== Signature / Disclaimer ========> Please be aware:For questions about the type of support to expect please check
here Please also ensure you always check the
VoIP ,
Video Endpoint ,
Skype for Business ,
PSTN or
RPM FAQ's
Please remember, if you see a post that helped you , and it answers your question, please mark it as an
"Accept as Solution".
The title
Polycom Employee & Community Manager is an automatic setting within the community and any forum reply or post is based upon my
personal experience and
does not reflect the opinion or view of my employer.
Poly employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and maybe answered on weekends, bank holidays or personal holidays.
