Polycom CX 5500 Registered to CUCM with simultaneous Lync video call
I'll start out by saying I know the CX 5500 is not officially supported being SIP registered to CUCM. The scenario is similar to one I asked about CX5000 the other day, but with a different device. Can you have a SIP audio call going out through CUCM, and have a LYNC video call connected via USB simultaneously briding the two together?
Re: Polycom CX 5500 Registered to CUCM with simultaneous Lync video call
There is no built in bridging on these devices. If USB is used for a LYNC call the phone part of the CX5500 is not accessibly.
Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.
Polycom Global Services
Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels. Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's