The phone was running SIP 3.2.2, running provisioned using IPFX.
The problem started today, when it started it got stuck at updating initial configuration. When there was no activity for more than 3 hours, I plugged out the PoE lan cable, used the key combination 1,3,5,7 to reboot the phone and since then the phone is now in an endless loop.
It starts, shows the Polycom Logo, displays the message "Welcome, start boot in 6 s" and then again reboots, without even initialising the network. Any suggestions?
I am unaware what IPFX is but as a workaround I would look at a local FTP server instead
Oct 7, 2011 Question: How can I setup my Phone / Provisioning / Download / Upgrade / Update / Downgrade Software? Resolution: Please check => here <=
The next step should also be to install a currently supported software. I suggest UC Software 4.0.14
Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.
Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels. Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's