Polycom TRIO 8800 - microphone mute fail after update

[User13]

After latest update (Polycom Trio 8800 Software 5.9.3 Rev AB) i am stuck with annoying problem. I can't unmute/mute microphone - it blinks whole time. Mute function works only from main screen.

Also after firmware upgrade there is no Zoom Room profile to select during configuration on the device - i can enable it only via www when login into device and select profile.

(btw. i also have the same issue with the old firmware too)

I have to upgrade to the latest Zoom App (5.0) in polycom trio, cause security policies. Downgrade is impossible.

[SteffenBaierUK]

Hello @User13 ,

Welcome to the Poly Community.

Please get this into support.

After a Factory reset you should be presented with:

or you can select this via the Administration Settings > Network Configuration:

In order to raise a support ticket, you need to work with your Poly reseller as they may need to do this for you.

End Customers are usually unable to open a ticket directly with Poly support. Available End User Poly services offerings are detailed here

If this is some sort of an Internet discounter providing your MAC address or your Poly devices serial will enable us to look up who would be able to support you. This may not be who you purchased the Poly device from.

If the unit is no longer within the warranty please be prepared to Pay Per Incident / PPI. This is all outlined in detail here

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

[User13]

Sollution not work. Any other new firmware not fix the problem.