How do you factory reset a Polycom Trio Visual+?
Because I forgot the password to login.
Cheers
Thieu.
Hello Thieu,
welcome to the Polycom Community.
The community's VoIP FAQ contains this post here:
Oct 10, 2011 Question: How can I reset / Factory default my Phones configuration?
Resolution: Please check => here <=
Please ensure you always check the community FAQ and/or utilize the community search before posting any new topics or follow up post’s.
Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.
Best Regards
Steffen Baier
Polycom Global Services
To reset the RealPresence Trio Visual+ to factory defaults at power up:
1 Power on the RealPresence Trio Visual+.
2 When the pairing button light turns on, press and hold the pair button.
3 Let go of the pair button when the light begins flashing.
Hello Krzysztof_K,
welcome to the Polycom Community.
The above reply already contains this information.
Best Regards
Steffen Baier
Polycom Global Services
So i've done the following, restart the Visual +, hold down the button, when it blinks let go, but it is yet to release the static IP address that i once gave it. Im wanting to to be DHCP rather. Is this a different process?
Hello @Aweihl ,
Welcome to the Poly Community.
The above-mentioned FAQ has not changed. As long as the LED's then flash in the described order the reset will work.
Or simply use a USB stick and load a configuration to load a DHCP configuration.
If this fails please work with your Poly reseller.
In order to raise a support ticket, you need to work with your Poly reseller as they may need to do this for you.
End Customers are usually unable to open a ticket directly with Poly support.
If this is some sort of an Internet discounter providing your MAC address or your Poly devices serial will enable us to look up who would be able to support you. This may not be who you purchased the Poly device from.
If the unit is no longer within the warranty please be prepared to Pay Per Incident / PPI. This is all outlined in detail here
Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.
Best Regards
Steffen Baier
"Or simply use a USB stick and load a configuration to load a DHCP configuration."
Do you have the .cfg file?
Hello @Aweihl ,
Dec 04, 2015 Question:How can I provision/upgrade the software via USB for the Poly Trio and/or Visual+?
Resolution: Please check this post => here <=
Basically the reverse option of manual:
<auto device.set="1" device.dhcp.enabled.set="1" device.dhcp.enabled="1" device.net.ipAddress.set="0" device.net.ipAddress="" device.net.subnetMask.set="0" device.net.subnetMask="" device.net.IPgateway.set="0" device.net.IPgateway="" device.dns.serverAddress.set="0" device.dns.serverAddress=""/>
Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.
Best Regards
Steffen Baier
Great! ill give that a shot, i appreciate the quick response