Plantronics + Polycom. Now together as Poly Logo

Polycom VVX - Send RTCP to remote collector

Occasional Contributor

Polycom VVX - Send RTCP to remote collector

I was wondering if it's possible to send  RTCP (RFC 3611) to a remote collector in the same fashion as RFC 6035, as I don't have the VQmon liscense. Here are the parameters I have set in my config: 
voice.qualityMonitoring.collector.server.1.address="MY SERVER"
Looking at packet captures, I'm seeing that RTCP reports are being generated and sent to the IP address of my SIP server, but not what I specified in my config (different hosts). Since the phone is already generating/sending RTCP reports, it would make sense that you should be able to decide where to send the data. 
Message 1 of 2
Polycom Employee & Community Manager

Re: Polycom VVX - Send RTCP to remote collector

Hello @philgreco,

welcome back to the Polycom Community.

It is always useful to include the currently used UC Software version as issues experienced or a question asked may already be addressed in a newer release.

This also allows yourself and others to check against current software release notes, Administrator Guides or FAQ post’s.

The above is also stated in the "Must Read First" and is the absolute minimum requirement every new post should include. .

In addition providing us with this basic information gives Polycom an idea what Software Versions are used in the field and avoids wasting time trying to troubleshoot issues which have already been addressed.

Therefore the Polycom VoIP FAQ contains this post here:

Question: How can I find out my SIP or UC Software Version of my Phone?
Resolution: Please check here


It also helps to attach a backup of the configuration rather than assume that a configuration has been applied.


Logs / Wireshark traces can also be useful.

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services

<======== Signature / Disclaimer ========>
Please be aware:For questions about the type of support to expect please check here

Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

The title Polycom Employee & Community Manager is an automatic setting within the community and any forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Poly employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and maybe answered on weekends, bank holidays or personal holidays.
Message 2 of 2