Solved! Go to Solution.
Hello Zdenk,
welcome to the Polycom Community.
The CX500, in comparison with the CX600 is an "entry" level phone.
The CX500 Data sheet => here <= states:
The CX600 Data sheet => here <= states:
Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.
Best Regards
Steffen Baier
Polycom Global Services
Hello Zdenk,
welcome to the Polycom Community.
The CX500, in comparison with the CX600 is an "entry" level phone.
The CX500 Data sheet => here <= states:
The CX600 Data sheet => here <= states:
Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.
Best Regards
Steffen Baier
Polycom Global Services
Thanks for reply.
Zdeněk
I have one more question...if I put telephone handset on the table, could I use it like microphone and still use speakers from phone to listen loud. Is it possible? :)
Thanks Zdeněk
Hello Zdenk,
If the loudspeaker is active the handset is disabled.
Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.
Best Regards
Steffen Baier
Polycom Global Services
Hi We have lots of these CX600. several of them seem to be functioning strangle, I have gone through the reset routines but the phones are still playing up.
When a call arrives the use picks up the hand set and begins to speak then straight away the speaker comes on and the handset no longer works. pressing the speaker button on the phone only ends the call.
Any advice please
Hello PaulB,
welcome to the Polycom Community.
It is always useful to state if this is an issue that has recently occurred or a day one issue.
Most likely the units are defective and need an RMA via your Polycom reseller.
Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.
Best Regards
Steffen Baier
Polycom Global Services