Power Kit for RealPresence Trio 8800 and Trio Visual+. Incl. 100-240V, 0.8A, 55V/36W, IEEE 802.3at compliant mid-span power injector for 10/100/1000 Mbps Ethernet. Ships with 2.5m/8.2ft power cord with UK plug and 2.1m/7ft Ethernet cable.
Can we use the above power kit in the poly TC8? Also, will it cause any problem if I mistakenly mix up the power kit for Trio 8800 and poly TC8?
A power kit will communicate with the device about the power requirements and only serve what is required. The Trio Power Kit is PoE+ capable and I personally have powered my own TC8 with it with no issues.
Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.
Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels. Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's