Plantronics + Polycom. Now together as Poly Logo

Problem with connecting VVX color expansion module to VVX 501 5.6.0.17325

Occasional Visitor

Problem with connecting VVX color expansion module to VVX 501 5.6.0.17325

Hello,

I have two VVX phones:

VVX301 with 5.7.0.11768 software and VVX501 with 5.6.0.17325, and one VVX Expansion Console.

Expansion console works fine with VVX301, but with VVX501 doesn't power up  at all.

When I try to connect console with VVX501, led on console start with green and red light, but after that console screen is black.

At phones menu on VVX 301 I can see EM1 in Setting<<Status (Type:LCD, Version 0.07, Assembly 3111-46350-001 Rev:A ), but on VVX501 is not show.

 

 

Message 1 of 2
1 REPLY 1
Highlighted
Polycom Employee & Community Manager

Re: Problem with connecting VVX color expansion module to VVX 501 5.6.0.17325

Hello @SaskaS,

welcome to the Polycom Community.

Have you tried to factory restore the VVX501 ?

 

The next step would be to raise a support ticket.

In order to raise a support ticket you need to work with your Polycom reseller as they need to do this for you.

End Customers are unable to open a ticket directly with Polycom support.

If this is some sort of an Internet discounter please post either your phone's MAC address or your Polycom devices serial so I can look up who would be able to support you. This may not be who you purchased the Polycom device from.

If the unit is no longer within warranty please be prepared to Pay Per Incident / PPI. This is all outlined in detail here

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services




<======== Signature / Disclaimer ========>
Please be aware:For questions about the type of support to expect please check here

Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

The title Polycom Employee & Community Manager is an automatic setting within the community and any forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Poly employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and maybe answered on weekends, bank holidays or personal holidays.
Message 2 of 2