Plantronics + Polycom. Now together as Poly Logo

RTP port + one general question

Highlighted
Occasional Contributor

RTP port + one general question

Hi,

 

Question on RTP port.

 

I can see on the WebGui of the IP450, concerning  the RTP port :

* "Port forced " and "Port start range"

 

- Port Forced : Does it mean that you force the voice to go through on ONE PORT ONLY ?

- "Port start Range" : If you have a "port Start " I would expect to see "Port End " ?

=> DId I miss out something ? How can I specifiy a port start and a port end ?

 

 

 

2) more generally, I dig up into the .cfg files after downloading the "sip 3.3.2" I can see that most of the config seems to be in these files.

- Does it mean that, while booting, the phone will check out any changes on these files ? ( That's the way to mofify the config of all the soundpoint  phones at the same time ? is that correct ? )

 

Thanks and regards,

 

Steve

Message 1 of 2
1 REPLY 1
Polycom Employee & Community Manager

Re: RTP port + one general question

Hello Steve,

 

Question 1:

 

All Parameters are described in the UCS 3.3.0 Admin Guide and additional Information for newer introduced Parameters are usually highlighted in the Release notes.

 

 

Question 2:

 

Please check the Feature Descriptions & Technical Notifications for the following document => here <=.

 

Since UCS 3.3.0 all standard Parameters are included in the Software and the Phone can load single or additional configuration files. The Files in the \config subdirectory are only templates.

 

The Community holds plenty provisioning examples and any further details should be provided via your Polycom Reseller.

 

Best regards

 

Steffen Baier

 

Polycom Global Services

 

----------------
The title Polycom Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. My official "day" Job is 3rd Level support at Poly but I am unable to provide official support via the community.

----------------

Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.
Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's
Message 2 of 2