Plantronics + Polycom. Now together as Poly Logo

Receiving Telephony Events From Sound Point IP 650

SOLVED
Highlighted
Polycom Employee & Community Manager

Re: Receiving Telephony Events From Sound Point IP 650

Hello Jerry,

 

only a wireshark trace or modifying the log levels on the Phone could/would tell if the Phone sends the data to this URL or if Tomcat refuses to accept the Data.

 

This is more a support related issue and should be dealt with via the proper channels described in the FAQ and outside the scope of this community.

 

I have tested this before in my lab and this works in SIP 3.2.x, UCS 3.3.x and UCS 4.0.x without issues using the suggested Websnarf as an example.

 

Other Members in this forum have also tested this before =>here <=.

 

Best Regards

 

Steffen Baier

 

Polycom Global Services

----------------
The title Polycom Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. My official "day" Job is 3rd Level support at Poly but I am unable to provide official support via the community.

----------------

Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.
Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

View solution in original post

Message 11 of 13
Highlighted
Occasional Advisor

Re: Receiving Telephony Events From Sound Point IP 650

OK - thanks for you input.

Message 12 of 13
Highlighted
Polycom Employee & Community Manager

Re: Receiving Telephony Events From Sound Point IP 650

Just tested this quickly running UCS 3.3.2 on a SPIP650

 

SPIP650_DataPush.png

 

If no application is listening I can see the Phone trying to establish a connection with the Destination IP Address

 

DataPush_02.png

 

The issue must be on your end / network etc. but the functionality works as advertised.

 

Once the app is listening (in my example websnarf) the HTTP Post is succesfull.

 

Best Regards

 

Steffen Baier

 

Polycom Global Services

----------------
The title Polycom Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. My official "day" Job is 3rd Level support at Poly but I am unable to provide official support via the community.

----------------

Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.
Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's
Message 13 of 13