Plantronics + Polycom. Now together as Poly Logo

Reusing IP 550 phones from 8x8

Occasional Visitor

Reusing IP 550 phones from 8x8

We recently moved our phone service in-house from 8x8 and we are reusing the phones from 8x8. These phones are IP 550. Before we can reuse the phones, I reset the phones to factory defaults and now I am getting strange behavior.

When I try to dial an extension like 11x or 10x, I get the a busy signal. If I do not pickup the handset, enter the number and press dial, it works. This only happens when I pick up the hand set and then try to dial.

 

Regards

 

Message 1 of 2
1 REPLY 1
Highlighted
Polycom Employee & Community Manager

Re: Reusing IP 550 phones from 8x8

Hello rxm,

welcome to the Polycom Community.

The community's VoIP FAQ contains this post here:


Oct 7, 2011 Question: Phone unable to Dial a number when Off Hook or on 2nd Call in a Conference

Resolution: Please check => here <=


Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services

----------------

Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.
Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's
Message 2 of 2