SIP vvx 310 multiple register with SFB

SOLVED
Highlighted
Occasional Advisor

SIP vvx 310 multiple register with SFB

Dear;
My question is the following story with a vvx 310 with SFB (P / N: 2200-46161-018), my question is if this phone model supports multiple SIP registrations and instead of using the SFB account I can use it to make a SIP registry.
thank you very much I remain attentive to your comments

Message 1 of 4
3 REPLIES
Polycom Employee & Community Manager

Re: SIP vvx 310 multiple register with SFB

Hello @sldt,

welcome back to the Polycom community.

Some or a couple of your old post(s) => here <= are still open / pending as you have not marked these as "Accept as a solution" or at least provided some form of feedback or answer.

If they are in this state nobody finding them via a community search will know if an answer or advice provided was useful and has maybe helped you.

Could you therefore kindly go over them and mark or answer as appropriate ?

If they are marked as "Accept as a solution" other users can find these easier and it helps them to utilise the community more efficiently.

 

RecentlyAnswered.PNG

 

In addition it is always useful to include the currently used UC Software version as issues experienced or a question asked may already be addressed in a newer release. 

I am unsure if you are asking to convert a Skype for Business SKU version phone into an openSIP?

 

If yes simply press the Key Combination as shown => here <=

 

Best Regards

 

Steffen Baier

Please be aware:

The purpose of these forums is to allow community members collaborate and help each other.
Questions posted here do not follow Polycom’s SLA guidelines.
If you require assistance from Polycom technical support, please open a
web service request or call us .

The above is necessary in order to track issue internally within Polycom.

You are welcome to post more questions or configuration or logs for other community members to look at but if your issue requires a fix via Polycom you must go via the official support structure.

Please ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

This forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Polycom employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and may be answered on weekends, bank holidays or personal holidays.
Message 2 of 4
Occasional Advisor

Re: SIP vvx 310 multiple register with SFB

Dear Steffen;

My query is as follows: if the VVX 310 P/N: 2200-46161-019 can also be used as standard SIP only equipment? regardless of any software version

Message 3 of 4
Trusted Contributor

Re: SIP vvx 310 multiple register with SFB

Hi @sldt,

 

yes you can, just switch the Base Profile under Easy Setup to Generic and you can use it as normal SIP. Nevertheless, newest Firmware is always recommended.

Message 4 of 4