• ×
    Information
    Windows update impacting certain printer icons and names. Microsoft is working on a solution.
    Click here to learn more
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Windows update impacting certain printer icons and names. Microsoft is working on a solution.
    Click here to learn more
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
The HP Community is where owners of HP products, like you, volunteer to help each other find solutions.
HP Recommended

I have a VVX 410 I am wanted to provision using HTTPS

I have everything working on HTTP without issue.

The webserver that has the provisioning files is signed using a self signed cert.

I have already installed the cert on the VVX 410 under Platform CA 1.  I see the name and thumbprint and they are correct

 

I also set an NTP server and corrected the time zone to ensure it was not a time issue.

 

Here are the logs after lowering CURL, TLS, and CERTIFICATE settings

 

0304121510|curl |3|00|About to connect() to *FQDN* port 443 (#0)
0304121510|curl |3|00| Trying *IPV4*...
0304121510|curl |3|00|the local port callback returned 0
0304121510|curl |3|00|Local port: 63017
0304121510|curl |3|00|Connected to *FQDN* (*IPV4*) port 443 (#0)
0304121511|curl |3|00|successfully set certificate verify locations:
0304121511|curl |3|00| CAfile: /ffs0/ca1.crt
CApath: none
0304121511|curl |3|00|SSLv3, TLS handshake, Client hello (1):
0304121511|curl |3|00|SSLv3, TLS handshake, Server hello (2):
0304121511|curl |3|00|SSLv3, TLS handshake, CERT (11):
0304121511|curl |3|00|SSLv3, TLS alert, Server hello (2):
0304121511|curl |3|00|SSL certificate problem, verify that the CA cert is OK. Details:
error:14090086:SSL routines:SSL3_GET_SERVER_CERTIFICATE:certificate verify failed
0304121511|curl |3|00|Closing connection #0
0304121511|copy |4|00|SSL_connect error Peer certificate cannot be authenticated with known CA certificates.SSL certificate problem, verify that the CA cert is OK. Details:
error:14090086:SSL routines:SSL3_GET_SERVER_CERTIFICATE:certificate verify failed
0304121511|log |4|00|UtilLogServerC::uploadFifoLog: upload error. protocol 0 result = -1
0304122329|cfg |4|00|Web||ParamParser|Parameter identifier is out of range: "14791"(14791)
0304122329|cfg |4|00|Web||ParamParser|Parameter identifier is out of range: "14791"(14791)

 

What am I missing here to get this working?

13 REPLIES 13
HP Recommended

Hello pswarowski,

 

welcome to the Polycom Community.

It is always useful to include the currently used UC Software version as issues experienced may already be addressed in a newer release.

Please also include if you are using a SIP server or a LYNC server
If LYNC or Skype please provide Version details and if these are on premise of off premise

This also allows yourself and others to check against current software release notes.

The above is also stated in the "Read First: Welcome to the Polycom VoIP Forum"

Therefore the Polycom VoIP FAQ contains this post here:

Question: How can I find out my SIP UC Software Version or the BootROM Version of my Phone?
Resolution: Please check here

 

You may want to lower the CURL logging level to event 1 and check again.


Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services

------------------------------------------------
Notice: I am an HP Poly employee but all replies within the community are done as a volunteer outside of my day role. This community forum is not an official HP Poly support resource, thus responses from HP Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge.
If you need immediate and/or official assistance for former Poly\Plantronics\Polycom please open a service ticket through your support channels
For HP products please check HP Support.

Please also ensure you always check the General VoIP , Video Endpoint , UC Platform (Microsoft) , PSTN
HP Recommended

UC Software version: 4.1.7.1210

SIP server

CURL is currently set to Debug

I set it to Event 1 and rebooted and this is what shows up now.

 

0304144857|curl |3|00|timeout on name lookup is not supported
0304144857|curl |3|00|About to connect() to *FQDN* port 443 (#0)
0304144857|curl |3|00| Trying *IPV4*...
0304144857|curl |3|00|the local port callback returned 0
0304144857|curl |3|00|Local port: 45290
0304144857|curl |3|00|Connected to *FQDN* (*IPV4*) port 443 (#0)
0304144857|curl |3|00|successfully set certificate verify locations:
0304144857|curl |3|00| CAfile: /ffs0/ca1.crt
CApath: none
0304144857|curl |3|00|SSLv3, TLS handshake, Client hello (1):
0304144857|curl |3|00|SSLv3, TLS handshake, Server hello (2):
0304144857|curl |3|00|SSLv3, TLS handshake, CERT (11):
0304144857|curl |3|00|SSLv3, TLS alert, Server hello (2):
0304144857|curl |3|00|SSL certificate problem, verify that the CA cert is OK. Details:
error:14090086:SSL routines:SSL3_GET_SERVER_CERTIFICATE:certificate verify failed
0304144857|curl |3|00|Closing connection #0
0304144857|copy |4|00|SSL_connect error Peer certificate cannot be authenticated with known CA certificates.SSL certificate problem, verify that the CA cert is OK. Details:
error:14090086:SSL routines:SSL3_GET_SERVER_CERTIFICATE:certificate verify failed
0304144857|log |4|00|UtilLogServerC::uploadFifoLog: upload error. protocol 0 result = -1
0304144857|log |4|00|Failed to upload boot log on start up.
HP Recommended

Any updates on this? I'm having the exact same issue however I cannot use HTTP at all so no provisioning for my Polycom phones. I just need to get the VVX410 to accept a self-signed certificate for provisioning.

HP Recommended

Hello all,

welcome to the Polycom Community.

The community's VoIP FAQ contains this post here:

 

Oct 7, 2011 Question: How can I setup my Phone / Provisioning / Download / Upgrade / Update / Downgrade Software?
Resolution: Please check => here <=

 

This part of the post => here <= shows how to setup a HTTPS server and the relevant logs.


Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services

------------------------------------------------
Notice: I am an HP Poly employee but all replies within the community are done as a volunteer outside of my day role. This community forum is not an official HP Poly support resource, thus responses from HP Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge.
If you need immediate and/or official assistance for former Poly\Plantronics\Polycom please open a service ticket through your support channels
For HP products please check HP Support.

Please also ensure you always check the General VoIP , Video Endpoint , UC Platform (Microsoft) , PSTN
HP Recommended

Hello guys,

 

I have the same issues with Polycom VVX 400.

My UC version is 4.1.4.7430.

I've tried to register with SIP TLS on a SIP hosted PBX.

I have CA certificate from hosted pbx guys but I still get these errors:

 

|SSL_connect error Peer certificate cannot be authenticated with known CA certificates.SSL certificate problem, verify that the CA cert is OK. Details:
error:14090086:SSL routines:SSL3_GET_SERVER_CERTIFICATE:certificate verify failed

 

Have anyone an ideea?

 

Thank you,

Nick

 

HP Recommended

Hello Nick,

welcome to the Polycom Community.

The Software you are using is no longer supported. Please update do a currently supported one.

 

In addition:

 

Apr 17, 2013 QuestionHow can I setup a TLS connection for SIP signaling and / or troubleshoot this?

Resolution: Please check => here <=


Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services

------------------------------------------------
Notice: I am an HP Poly employee but all replies within the community are done as a volunteer outside of my day role. This community forum is not an official HP Poly support resource, thus responses from HP Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge.
If you need immediate and/or official assistance for former Poly\Plantronics\Polycom please open a service ticket through your support channels
For HP products please check HP Support.

Please also ensure you always check the General VoIP , Video Endpoint , UC Platform (Microsoft) , PSTN
HP Recommended

Hey Steffen,

 

I've upgraded UC software to version 5.4.0.5841.

I've uploaded CA certificate like in the link you have provided to me and  phone is still unregistered,

errors:

 

|sip |4|00|[cert_verify_callback,tcp]:Server certificate verification failed, Untrusted Certificate,error=18
1206164531|sip |4|00|MakeTlsConnection: SSL_connect error 1
1206164531|sip |4|00|MakeTlsConnection: connection failed error -1

 

Thank you,

Nick

HP Recommended

Hello Nick,

I would suggest you lower the logging levels as follows:

 

  • Settings > Logging > Global Log Level Limit > Debug
    Settings > Logging > Module Log Level Limits > SIP to Debug


Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services

------------------------------------------------
Notice: I am an HP Poly employee but all replies within the community are done as a volunteer outside of my day role. This community forum is not an official HP Poly support resource, thus responses from HP Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge.
If you need immediate and/or official assistance for former Poly\Plantronics\Polycom please open a service ticket through your support channels
For HP products please check HP Support.

Please also ensure you always check the General VoIP , Video Endpoint , UC Platform (Microsoft) , PSTN
HP Recommended

Hi Steffen,

 

That help because I could see more log messages, but my phone is still unregistered.

If you can take a look on these:

 

231037|sip |2|00|new UA Client Non-INVITE trans state 'callingTrying', timeout=0 (0x40e334e8)
1206231037|sip |3|00|RegClient:RegClient expire 66 overlap 0
1206231037|sip |1|00|CreateFailOverProxyList : Reg to Domain '1076' nPort 5061, lkup 5
1206231037|sip |1|00|CreateFailOverProxyList : Domain is in user part
1206231037|sip |1|00|CreateFailOverProxyList : For REGISTER Request nPort 5061
1206231037|sip |1|00|doDnsListLookup(tls): doDnsSrvLookupForARecordList for 'core1-lax.phyber.com' port 5061 returned 1 results
1206231037|sip |1|00|doDnsListLookup(tls): result 0 '207.171.29.11' port 5061 isInBound 0
1206231037|sip |1|00|CreateFailOverProxyList : 'TLS' for 'core1-lax.phyber.com' port 5061 IP 0 is '207.171.29.11' on tls port 5061
1206231037|sip |2|00|CreateFailOverProxyList : Exit 'TLS' lookup with 1 IP Addresses
1206231037|sip |2|00|CreateFailOverProxyList : IP 1 is '207.171.29.11' on tls port 5061
1206231037|sip |1|00|CTrans:: SendCommand | this=40e334e8, bVQMonMessage=0, m_pCall->m_pUser->m_bOBFailOverReRegOn=0, m_pCall->m_pUser->m_bVQMonFailoverEnabled=1
1206231037|sip |1|00|CTcp::Send(TLS) entry for address 207.171.29.11 port 5061 can Connect 1 canFailOver 0
1206231037|sip |1|00|CTcp::Send(TLS) address 207.171.29.11 port 5061 can Connect 1
1206231037|sip |2|00|CTcpSocket::CTcpSocket entry m_bIsTcpPersistentConnection 0, Inbound 0 Timeout 120 this 0x40e35308
1206231037|sip |3|00|Open socket 143(0x40e35308)
1206231037|sip |1|00|SetRemoteAddress set SND BUF to 64000 OK
1206231037|sip |1|00|SetRemoteAddress set SEND TIMEOUT to 100ms OK
1206231037|sip |3|00|SetRemoteAddress OK on try 1 nPort 63234 0x40e35308
1206231037|sip |3|00|CTcpSocket::ConnectThreadLocal. Trying to connect IP 207.171.29.11:5061
1206231037|sip |1|00|Task name tTCPCnt143
1206231037|sip |1|00|CTcp::Send(TLS) exit for address 207.171.29.11 port 5061 can Connect 1 status 1 canFailOver 0 FoundSocket 0
1206231037|sip |2|00|adjustRetransWhenTimerCreated UA Client Non-INVITE REGISTER state 'callingTrying' timeout=65 (0x40e334e8)
1206231037|sip |3|00|connectNonBlock is successful
1206231037|sip |1|00|MsgSipTcpSocketStatus socket 143 status 1 m_bIsReconnectNeeded 0
1206231037|sip |2|00|CTcpSocket::OnSocketStatus socket 143(0x40e35308) bStatus 1
1206231037|sip |4|00|[cert_verify_callback,tcp]:Server certificate verification failed, Untrusted Certificate,error=18
1206231037|sip |2|00|MakeTlsConnection: case 0x14090086: bFetchRootCert is TRUE
1206231037|sip |4|00|MakeTlsConnection: SSL_connect error 1
1206231037|sip |4|00|MakeTlsConnection: connection failed error -1
1206231037|sip |3|00|CTrans::TCPFail workingServer 1 -> 2 0x40e334e8
1206231037|sip |3|00|UA Client Non-INVITE REGISTER trans state 'callingTrying'->'completed' by 480 resp 10 timeout(0x40e334e8)
1206231037|sip |2|00|CTrans:: REGISTER NonInv reTrans ALREADY stopped in 'completed' state at retryCount 0 code 480, timeout=10 (0x40e334e8)
1206231037|sip |1|00|CTrans:: ResponseProcess | Follow SIP logic
1206231037|sip |2|00|CTrans::AbandonSockets server 2 entry 0x40e334e8
1206231037|sip |1|00|Dialog 'id016da1f5' State 'Trying'->'Confirmed'
1206231037|pps |4|00|[PpsHybridC::OnEvSipOnFetchRootCert] Lync Special Interop is disabled.
1206231037|pps |4|00|[PpsHybridC::OnEvSipOnFetchRootCert] Exiting from certificate fetch procedure.
1206231037|sip |3|00|CUser::OnRegistered Entry for call 0xddaa58 with expires 0 ticks Transport 'TLS' inval Method 2 RROFO 0
1206231037|sip |3|00|CUser::NewWorkingServer user 0 oldServer 0 newServer 0 expires 0
1206231037|sip |3|00|SipOnEvNewWorkingServer User 0, old 0, new 0, expire 0
1206231037|sip |3|00|SipOnEvRegistrarUpdate User 0, index 0, state 0, expire 0, working 1 bIsOcs 0
1206231037|sip |3|00|CUser::HasNoCallCallInState for User 142,Index 0, total calls 1 state 'SubscribeAddressBook' rc 0 of type Not Applicable
1206231037|sip |1|00|Dialog 'id016da1f5' State 'Confirmed'->'Terminated'
1206231037|sip |2|00|CStkDialog::CStkDialog SetAddressLocal Config '142' <142@1076:0>
1206231037|sip |2|00|CStkDialog::CStkDialog AddressLocal set to Config
1206231037|sip |3|00|CStkDialog::SetAddressLocal localTag set to ''
1206231037|sip |3|00|CStkDialog::SetAddressLocal new address added of 1
1206231037|sip |2|00|CStkDialog::CStkDialog TAG '8A4190DF-EE3FF2E2' generated
1206231037|sip |2|00|CStkDialog::CStkDialog local addr '142' <142@1076:0> Tag '8A4190DF-EE3FF2E2'
1206231037|sip |2|00|CStkDialog::CStkDialog exit 0xdf25c8 local list size 1
1206231037|sip |2|00|CStkDialogList::CreateDialogObject localTarg usr '142'
1206231037|sip |3|00|Reg UAC Response: code 480 consecutive Attempts 2 baseTimeOut 60 maxTimeOut 60 exponTimeOut 240 randomTimeOut 48
1206231037|sip |3|00|Reg UAC Response: code 480 new m_nExpire 96 m_nOverlap 0 Trans 0x40e334e8
1206231037|sip |3|00|SipStartFailOver 0
1206231037|sip |1|00|MsgSipTcpSocketStatus socket 143 status 0 m_bIsReconnectNeeded 0
1206231037|sip |2|00|CTcpSocket::OnSocketStatus socket 143(0x40e35308) bStatus 0
1206231037|sip |3|00|CTcpSocket::~CTcpSocket socket 143 entry for 0x40e35308
1206231037|sip |3|00|CTcpSocket::~CTcpSocket socket 143(0x40e35308) SSL_shutdown rc=1
1206231037|sip |3|00|CTcpSocket::~CTcpSocket socket 143(0x40e35308) close
1206231125|sip |3|00|NoCall::TimeOut500ms 'Registering' m_nExpire == 0 RegisterCall -> Schedule Register listSize 0 lTimeout 0
1206231125|sip |1|00|Schedule 'Register' nEvent 0 busyFlag 0 num events waiting 0
1206231125|sip |2|00|new UA Client Non-INVITE trans state 'callingTrying', timeout=0 (0x40e334e8)
1206231125|sip |3|00|RegClient:RegClient expire 66 overlap 0
1206231125|sip |1|00|CreateFailOverProxyList : Reg to Domain '1076' nPort 5061, lkup 5
1206231125|sip |1|00|CreateFailOverProxyList : Domain is in user part
1206231125|sip |1|00|CreateFailOverProxyList : For REGISTER Request nPort 5061
1206231125|sip |1|00|doDnsListLookup(tls): doDnsSrvLookupForARecordList for 'core1-lax.phyber.com' port 5061 returned 1 results
1206231125|sip |1|00|doDnsListLookup(tls): result 0 '207.171.29.11' port 5061 isInBound 0
1206231125|sip |1|00|CreateFailOverProxyList : 'TLS' for 'core1-lax.phyber.com' port 5061 IP 0 is '207.171.29.11' on tls port 5061
1206231125|sip |2|00|CreateFailOverProxyList : Exit 'TLS' lookup with 1 IP Addresses
1206231125|sip |2|00|CreateFailOverProxyList : IP 1 is '207.171.29.11' on tls port 5061
1206231125|sip |1|00|CTrans:: SendCommand | this=40e334e8, bVQMonMessage=0, m_pCall->m_pUser->m_bOBFailOverReRegOn=0, m_pCall->m_pUser->m_bVQMonFailoverEnabled=1
1206231125|sip |1|00|CTcp::Send(TLS) entry for address 207.171.29.11 port 5061 can Connect 1 canFailOver 0
1206231125|sip |1|00|CTcp::Send(TLS) address 207.171.29.11 port 5061 can Connect 1
1206231125|sip |2|00|CTcpSocket::CTcpSocket entry m_bIsTcpPersistentConnection 0, Inbound 0 Timeout 120 this 0x40e35308
1206231125|sip |3|00|Open socket 143(0x40e35308)
1206231125|sip |1|00|SetRemoteAddress set SND BUF to 64000 OK
1206231125|sip |1|00|SetRemoteAddress set SEND TIMEOUT to 100ms OK
1206231125|sip |3|00|SetRemoteAddress OK on try 1 nPort 58939 0x40e35308
1206231125|sip |3|00|CTcpSocket::ConnectThreadLocal. Trying to connect IP 207.171.29.11:5061
1206231125|sip |1|00|Task name tTCPCnt143
1206231125|sip |1|00|CTcp::Send(TLS) exit for address 207.171.29.11 port 5061 can Connect 1 status 1 canFailOver 0 FoundSocket 0
1206231125|sip |2|00|adjustRetransWhenTimerCreated UA Client Non-INVITE REGISTER state 'callingTrying' timeout=65 (0x40e334e8)
1206231125|sip |3|00|connectNonBlock is successful
1206231125|sip |1|00|MsgSipTcpSocketStatus socket 143 status 1 m_bIsReconnectNeeded 0
1206231125|sip |2|00|CTcpSocket::OnSocketStatus socket 143(0x40e35308) bStatus 1
1206231125|sip |4|00|[cert_verify_callback,tcp]:Server certificate verification failed, Untrusted Certificate,error=18
1206231125|sip |2|00|MakeTlsConnection: case 0x14090086: bFetchRootCert is TRUE
1206231125|sip |4|00|MakeTlsConnection: SSL_connect error 1
1206231125|sip |4|00|MakeTlsConnection: connection failed error -1
1206231125|sip |3|00|CTrans::TCPFail workingServer 1 -> 2 0x40e334e8
1206231125|sip |3|00|UA Client Non-INVITE REGISTER trans state 'callingTrying'->'completed' by 480 resp 10 timeout(0x40e334e8)
1206231125|sip |2|00|CTrans:: REGISTER NonInv reTrans ALREADY stopped in 'completed' state at retryCount 0 code 480, timeout=10 (0x40e334e8)
1206231125|sip |1|00|CTrans:: ResponseProcess | Follow SIP logic
1206231125|sip |2|00|CTrans::AbandonSockets server 2 entry 0x40e334e8
1206231125|sip |1|00|Dialog 'id0001478d' State 'Trying'->'Confirmed'
1206231125|pps |4|00|[PpsHybridC::OnEvSipOnFetchRootCert] Lync Special Interop is disabled.
1206231125|pps |4|00|[PpsHybridC::OnEvSipOnFetchRootCert] Exiting from certificate fetch procedure.
1206231125|sip |3|00|CUser::OnRegistered Entry for call 0xddaa58 with expires 0 ticks Transport 'TLS' inval Method 2 RROFO 0
1206231125|sip |3|00|CUser::NewWorkingServer user 0 oldServer 0 newServer 0 expires 0
1206231125|sip |3|00|SipOnEvNewWorkingServer User 0, old 0, new 0, expire 0
1206231125|sip |3|00|SipOnEvRegistrarUpdate User 0, index 0, state 0, expire 0, working 1 bIsOcs 0
1206231125|sip |3|00|CUser::HasNoCallCallInState for User 142,Index 0, total calls 1 state 'SubscribeAddressBook' rc 0 of type Not Applicable
1206231125|sip |1|00|Dialog 'id0001478d' State 'Confirmed'->'Terminated'
1206231125|sip |2|00|CStkDialog::CStkDialog SetAddressLocal Config '142' <142@1076:0>
1206231125|sip |2|00|CStkDialog::CStkDialog AddressLocal set to Config
1206231125|sip |3|00|CStkDialog::SetAddressLocal localTag set to ''
1206231125|sip |3|00|CStkDialog::SetAddressLocal new address added of 1
1206231125|sip |2|00|CStkDialog::CStkDialog TAG '74E4D7DA-88AE2355' generated
1206231125|sip |2|00|CStkDialog::CStkDialog local addr '142' <142@1076:0> Tag '74E4D7DA-88AE2355'
1206231125|sip |2|00|CStkDialog::CStkDialog exit 0xdf2914 local list size 1
1206231125|sip |2|00|CStkDialogList::CreateDialogObject localTarg usr '142'
1206231125|sip |3|00|Reg UAC Response: code 480 consecutive Attempts 3 baseTimeOut 60 maxTimeOut 60 exponTimeOut 480 randomTimeOut 46
1206231125|sip |3|00|Reg UAC Response: code 480 new m_nExpire 92 m_nOverlap 0 Trans 0x40e334e8
1206231125|sip |3|00|SipStartFailOver 0
1206231125|sip |1|00|MsgSipTcpSocketStatus socket 143 status 0 m_bIsReconnectNeeded 0
1206231125|sip |2|00|CTcpSocket::OnSocketStatus socket 143(0x40e35308) bStatus 0
1206231125|sip |3|00|CTcpSocket::~CTcpSocket socket 143 entry for 0x40e35308
1206231125|sip |3|00|CTcpSocket::~CTcpSocket socket 143(0x40e35308) SSL_shutdown rc=1
1206231125|sip |3|00|CTcpSocket::~CTcpSocket socket 143(0x40e35308) close
1206231211|sip |3|00|NoCall::TimeOut500ms 'Registering' m_nExpire == 0 RegisterCall -> Schedule Register listSize 0 lTimeout 0
1206231211|sip |1|00|Schedule 'Register' nEvent 0 busyFlag 0 num events waiting 0
1206231211|sip |2|00|new UA Client Non-INVITE trans state 'callingTrying', timeout=0 (0x40e334e8)
1206231211|sip |3|00|RegClient:RegClient expire 66 overlap 0
1206231211|sip |1|00|CreateFailOverProxyList : Reg to Domain '1076' nPort 5061, lkup 5
1206231211|sip |1|00|CreateFailOverProxyList : Domain is in user part
1206231211|sip |1|00|CreateFailOverProxyList : For REGISTER Request nPort 5061
1206231211|sip |1|00|doDnsListLookup(tls): doDnsSrvLookupForARecordList for 'core1-lax.phyber.com' port 5061 returned 1 results
1206231211|sip |1|00|doDnsListLookup(tls): result 0 '207.171.29.11' port 5061 isInBound 0
1206231211|sip |1|00|CreateFailOverProxyList : 'TLS' for 'core1-lax.phyber.com' port 5061 IP 0 is '207.171.29.11' on tls port 5061
1206231211|sip |2|00|CreateFailOverProxyList : Exit 'TLS' lookup with 1 IP Addresses
1206231211|sip |2|00|CreateFailOverProxyList : IP 1 is '207.171.29.11' on tls port 5061
1206231211|sip |1|00|CTrans:: SendCommand | this=40e334e8, bVQMonMessage=0, m_pCall->m_pUser->m_bOBFailOverReRegOn=0, m_pCall->m_pUser->m_bVQMonFailoverEnabled=1
1206231211|sip |1|00|CTcp::Send(TLS) entry for address 207.171.29.11 port 5061 can Connect 1 canFailOver 0
1206231211|sip |1|00|CTcp::Send(TLS) address 207.171.29.11 port 5061 can Connect 1
1206231211|sip |2|00|CTcpSocket::CTcpSocket entry m_bIsTcpPersistentConnection 0, Inbound 0 Timeout 120 this 0x40e35308
1206231211|sip |3|00|Open socket 143(0x40e35308)
1206231211|sip |1|00|SetRemoteAddress set SND BUF to 64000 OK
1206231211|sip |1|00|SetRemoteAddress set SEND TIMEOUT to 100ms OK
1206231211|sip |3|00|SetRemoteAddress OK on try 1 nPort 49192 0x40e35308
1206231211|sip |3|00|CTcpSocket::ConnectThreadLocal. Trying to connect IP 207.171.29.11:5061
1206231211|sip |1|00|Task name tTCPCnt143
1206231211|sip |1|00|CTcp::Send(TLS) exit for address 207.171.29.11 port 5061 can Connect 1 status 1 canFailOver 0 FoundSocket 0
1206231211|sip |2|00|adjustRetransWhenTimerCreated UA Client Non-INVITE REGISTER state 'callingTrying' timeout=65 (0x40e334e8)
1206231211|sip |3|00|connectNonBlock is successful
1206231211|sip |1|00|MsgSipTcpSocketStatus socket 143 status 1 m_bIsReconnectNeeded 0
1206231211|sip |2|00|CTcpSocket::OnSocketStatus socket 143(0x40e35308) bStatus 1
1206231211|sip |4|00|[cert_verify_callback,tcp]:Server certificate verification failed, Untrusted Certificate,error=18
1206231211|sip |2|00|MakeTlsConnection: case 0x14090086: bFetchRootCert is TRUE
1206231211|sip |4|00|MakeTlsConnection: SSL_connect error 1
1206231211|sip |4|00|MakeTlsConnection: connection failed error -1
1206231211|sip |3|00|CTrans::TCPFail workingServer 1 -> 2 0x40e334e8
1206231211|sip |3|00|UA Client Non-INVITE REGISTER trans state 'callingTrying'->'completed' by 480 resp 10 timeout(0x40e334e8)
1206231211|sip |2|00|CTrans:: REGISTER NonInv reTrans ALREADY stopped in 'completed' state at retryCount 0 code 480, timeout=10 (0x40e334e8)
1206231211|sip |1|00|CTrans:: ResponseProcess | Follow SIP logic
1206231211|sip |2|00|CTrans::AbandonSockets server 2 entry 0x40e334e8
1206231211|sip |1|00|Dialog 'id01358b64' State 'Trying'->'Confirmed'
1206231211|pps |4|00|[PpsHybridC::OnEvSipOnFetchRootCert] Lync Special Interop is disabled.
1206231211|pps |4|00|[PpsHybridC::OnEvSipOnFetchRootCert] Exiting from certificate fetch procedure.
1206231211|sip |3|00|CUser::OnRegistered Entry for call 0xddaa58 with expires 0 ticks Transport 'TLS' inval Method 2 RROFO 0
1206231211|sip |3|00|CUser::NewWorkingServer user 0 oldServer 0 newServer 0 expires 0
1206231211|sip |3|00|SipOnEvNewWorkingServer User 0, old 0, new 0, expire 0
1206231211|sip |3|00|SipOnEvRegistrarUpdate User 0, index 0, state 0, expire 0, working 1 bIsOcs 0
1206231211|sip |3|00|CUser::HasNoCallCallInState for User 142,Index 0, total calls 1 state 'SubscribeAddressBook' rc 0 of type Not Applicable
1206231211|sip |1|00|Dialog 'id01358b64' State 'Confirmed'->'Terminated'
1206231211|sip |2|00|CStkDialog::CStkDialog SetAddressLocal Config '142' <142@1076:0>
1206231211|sip |2|00|CStkDialog::CStkDialog AddressLocal set to Config
1206231211|sip |3|00|CStkDialog::SetAddressLocal localTag set to ''
1206231211|sip |3|00|CStkDialog::SetAddressLocal new address added of 1
1206231211|sip |2|00|CStkDialog::CStkDialog TAG 'EFC370D-9A8FCEC0' generated
1206231211|sip |2|00|CStkDialog::CStkDialog local addr '142' <142@1076:0> Tag 'EFC370D-9A8FCEC0'
1206231211|sip |2|00|CStkDialog::CStkDialog exit 0xdf25c8 local list size 1
1206231211|sip |2|00|CStkDialogList::CreateDialogObject localTarg usr '142'
1206231211|sip |3|00|Reg UAC Response: code 480 consecutive Attempts 4 baseTimeOut 60 maxTimeOut 60 exponTimeOut 960 randomTimeOut 34
1206231211|sip |3|00|Reg UAC Response: code 480 new m_nExpire 68 m_nOverlap 0 Trans 0x40e334e8
1206231211|sip |3|00|SipStartFailOver 0
1206231211|sip |1|00|MsgSipTcpSocketStatus socket 143 status 0 m_bIsReconnectNeeded 0
1206231211|sip |2|00|CTcpSocket::OnSocketStatus socket 143(0x40e35308) bStatus 0
1206231211|sip |3|00|CTcpSocket::~CTcpSocket socket 143 entry for 0x40e35308
1206231211|sip |3|00|CTcpSocket::~CTcpSocket socket 143(0x40e35308) SSL_shutdown rc=1
1206231211|sip |3|00|CTcpSocket::~CTcpSocket socket 143(0x40e35308) close
1206231211|copy |*|00|Server '192.168.88.1' said '0004f2c78795-app.log' is not present
1206231211|copy |4|00|Could not set the custom header Content-Range for HTTP/s request. Head request failed to get content-length of server file.
1206231214|log |4|00|UtilLogServerC::uploadFifoLog: upload error. protocol 0 result = 0
1206231220|cfg |5|00|Prm|Parameter feature.broadsoftUcOne.enabled requested type 2 but is of type 7
1206231221|cfg |5|00|Prm|Parameter feature.broadsoftUcOne.enabled requested type 2 but is of type 7

 

The error is the same, Server certificate verification failed, Untrusted Certificate,error=18.

 

Thank you,

Nick

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.