Plantronics + Polycom. Now together as Poly Logo

[Software] Trio UC Software 5.7.1 Rev AB & GroupSeries 6.1.8

Highlighted
Polycom Employee & Community Manager

[Software] Trio UC Software 5.7.1 Rev AB & GroupSeries 6.1.8

UC Software 5.7.1 => here <= has the below added functionality: 

 

  • Group Series 310/500 Integration

 

In combination with a Polycom RealPresence GroupSeries* 310 or 500 running Software 6.1.8 you can now pair a Polycom Trio running UC Software 5.7.1.4133 Rev AB with a RealPresence GroupSeries instead of a Polycom Visual+

 

Polycom Trio 8800 Software 5.7.1 Rev AB

 
Aug 28, 2018
 

Polycom Trio 8800 Software 5.7.1 Rev AB CAB

 
 
 
Aug 28, 2018
 

RealPresence Group Series Version 6.1.8 Software (to be used with Polycom Trio 8800 Software 5.7.1 R...

 
Aug 28, 2018

 

NOTE: The GroupSeries 6.1.8 release is only for usage in combination with a Polycom Trio and no new features have been introduced.

 

GroupSeriesTrio.png

 

Change to Polycom Trio Mode when upgrading existing GroupSeries:

 

Trio_GroupSeriesMode_01.jpg 

Out of Box when running 6.1.8:

GroupSeries_Trio_01.jpg

 

 

With Polycom Trio you can right-size the technology to meet the needs of every workspace. Start with Trio 8800 or 8500, and then add a video and content accessory to complete the solution
Polycom Trio Visual+
Polycom RealPresence Group Series
Camera Input
USB (UVC 1.5)
HDCI
Cameras supported
EagleEye IV USB 
EagleEye Mini
Logitech C930e
EagleEye IV,
EagleEye IV USB,
EagleEye Producer,
EagleEye Director II,
EagleEye Acoustic
Since UC Software 5.9.0
EagleEye Cube
Wired content sharing inputs
USB, using People+Content IP
HDMI
USB, using People+Content IP
Wireless content options
People+Content IP
Skype for Business
People+Content IP
Skype for Business
Local content presentation using AirPlay and Miracast enabled devices
Yes
Yes
Video-based Screen Sharing (VbSS) support in Skype for Business calls
Receive only
Transmit(HDMI in) & Receive
Polycom Ceiling Microphone Array support
No
Yes
3.5mm audio output
Yes
Yes
Power options
Power over Ethernet
AC Adapter

 

Trio & GroupSeries

 

 GroupSeriesTrio_02.jpgPairing 1
 

GroupSeriesTrio_03.jpgPairing 2 

GroupSeriesTrio_04.jpgPaired
 

GroupSeriesTrio_06.jpgScreencapture

 * The GroupSeries needs to be manufactured ~ 2016 and be a Hardware Version 20 or higher
GroupSeries_Trio_5.jpg

 

Monitor Settings:

 

Group Series (if using a 500) must be set to Admin => Settings => Audio / Video / Content => Monitors => Monitor 2 => Enable as OFF if no 2nd Monitor is being used as otherwise the Self View is being displayed via the 2nd Monitor.

 

Trio_GroupSeriesMode_02.jpg

 

  • Unable to see any Skype for Business Options in the Polycom Trio Web Interface?
    Details on how to enable the Skype for Business Base profile can be found => here <=
  • Unable to access the Web Interface once the Polycom Trio has been changed into Skype for Business Base Profile?
    Details on how to re-enable the Web Interface can be found => here <=

  • Does the Trio support H.323 call when paired with a GroupSeries?
    Since UC Software 5.9.0 this was added as a Sandbox feature

  • Why are only limited options available when browsing to the Polycom RealPresence GroupSeries once in Trio Mode?
    The solution is controlled by the Trio and all relevant changes are made via the Trio

  • Does the Trio support Skype for Business and multiple additional registrations when paired with a GroupSeries?
    Please check => here <=

 

Screencapture of the GroupSeries TV UI:

 

http://<GS_IP>/currentscreen.cgi

 




<======== Signature / Disclaimer ========>
Please be aware:For questions about the type of support to expect please check here

Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

The title Polycom Employee & Community Manager is an automatic setting within the community and any forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Poly employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and maybe answered on weekends, bank holidays or personal holidays.