Hello Everyone,
We are happy to announce the availability of Polycom® UC Software 5.4.2 Rev D, with associated utilities and documents on the Polycom Product Support web page (http://support.polycom.com).
Jan 21, 2015 Question:Why does Polycom release / maintain different software versions ?
Resolution: Please check => here <=
UC Software 5.4.2.2834 Rev D is a Maintenance release which resolves some important customer escalations and has replaced the prior released 5.4.2.0334 due to additional technical issues found.
Polycom UC Software 5.4.2 Rev D supports the following Polycom endpoints:
Polycom UC Software 5.4.2 Rev D supports the following Polycom accessories:
What is available now on web?
How to download UCS 5.4.2 software, release notes & documents:
You can obtain the software and the related documentation from the supported phone model pages.
Additionally resolved Issues in the 5.4.2.2834 Rev D:
Category | Issue No. | Release | Description |
Provisioning | VOIP-112830 | 5.4.2 Rev D | Upgrading the phone from the Polycom hosted server on the phone's web UI no longer causes any issues. |
User Interface | VOIP-113295 VOIP-113146 | 5.4.2 Rev D | D60 pop-up messages on the phone's interface are now hidden. |
User Interface | VOIP-113299 | 5.4.2 Rev D | In a Genband environment, contacts are successfully saved to the Personal Address Book (PAB) from the Global Address Book (GAB) without any issue. |
User Interface | VOIP-113221 | 5.4.2 Rev D | Buddy presence on the home screen is now updated according to the buddy presence in the menu when the parameters voIpProt.SIP.presence.nortelShortMode =true and dir.local.serverFeatureControl.method="GENBANDSOPI" are set. |
Presence | VOIP-113222 | 5.4.2 Rev D | The phone sends a notification event to unsubscribe from the presence if the phone is unregistered or powered off. When the phone gets registered, it sends a notification event to subscribe for the presence. |
Authentication | VOIP-113454 | 5.4.2 Rev D | Cipher suites are configurable for the web server with new configuration parameters sec.TLS.profile.webServer.cipherSuiteDefault| and sec.TLS.webServer.cipherList|String. |
General | VOIP-113398 | 5.4.2 Rev D | All call logs get synchronized in the 3pip.onmicrosoft.com domain without any issue. |
General | VOIP-113399 | 5.4.2 Rev D | ABS or contact search works on the 3pip.onmicrosoft.com domain. |
General | VOIP-113400 | 5.4.2 Rev D | Exchange services works when the user is migrated or rolled back. |
Resolved Issues in the original 5.4.2.0334:
Category |
Issue No. |
Release |
Description |
Audio |
VOIP-108826 |
5.4.2 |
If a caller places call on mute, the notification sound for the recipient is improved. |
Calling |
VOIP-109264 |
5.4.2 |
If the contact directory has more than 40 contacts, the phone used to fail to display caller ID for an incoming call from a saved contact. This has been fixed. |
Calling |
VOIP-108811 |
5.4.2 |
In the Skype for Business environment, phone successfully establishes a conference when originating user alias starts with a number. |
Calling |
VOIP-108427 |
5.4.2 |
If a call was received on a sipxecs shared line number (with multiple line keys), there is only one call appearance instead of the incorrect two call appearances on two lines. |
Calling |
VOIP-105402 |
5.4.2 |
In a UC-One environment, phone can call speed dial contacts using the DID numbers instead of URL dialing. This enables the phone to call to the speed dial contacts even if the URL is disabled. |
Calling |
VOIP-102024 |
5.4.2 |
If a phone has shared and BLF lines and the shared line goes off hook, there is incoming call display but no ringing on the monitoring phone. This has been fixed. |
Contact Directory |
VOIP-108611 |
5.4.2 |
When the parameter ‘reg.x.server.y.specialInterop’ is set to Genband, the user can enter multiple entries in the contact directory without causing any issues. |
General |
VOIP-111245 |
5.4.2 |
For VQMoN users, the voice quality reports are improved. |
General |
VOIP-110690 |
5.4.2 |
If the SIP server challenges a BYE with old nonce from the phone, the phone responds with a BYE with new nonce. |
General |
VOIP-108947 |
5.4.2 |
Group paging works when a monitored Enhanced Park Orbit is active. |
General |
VOIP-108310 |
5.4.2 |
Web SDK Call Action API works properly and nCallReference is referenced correctly in XML API. |
General |
VOIP-107930 |
5.4.2 |
On VVX phones, you can set the parameter ‘feature.presence.enabled’ to 1 and enable Buddy Watch with Genband Personnel Address Book mode. |
Interoperability |
VOIP-110265 |
5.4.2 |
Phone successfully synchronizes call logs with Exchange. |
Interoperability |
VOIP-108375 |
5.4.2 |
To support a wide variety of switches, the LLDP power value for VVX 101 and 201 is reduced from 5000mW to 3500mW. |
Localization |
VOIP-108185 |
5.4.2 |
Support for Swedish language in the Broadsoft directory is improved. |
Security |
VOIP-109249 |
5.4.2 |
Denial of service vulnerabilities CVE-2015-1788, CVE-2015-1789, CVE-2015-1790, CVE-2015-1791, CVE-2015-1792, and CVE-2015-4000 in OpenSSL are fixed. |
Security |
VOIP-109212 |
5.4.2 |
Security issues involving RC4 encryption ciphers have been addressed. |
Security |
VOIP-110376 |
5.4.2 |
The cipher option for a web server is configurable. |
User Interface |
VOIP-109316 |
5.4.2 |
The administrator can set a URL or number mode as default with the parameter call.urlNumberModeToggling. |
User Interface |
VOIP-109211 |
5.4.2 |
The phone request timezone information only on first-time login when there is no SNTP server set and not after every reboot. |
User Interface |
VOIP-108943 |
5.4.2 |
A single line VVX 600 phone configured with one call per line displays the park softkey. |
User Interface |
VOIP-108664 |
5.4.2 |
The phone’s idle screen displays ‘Directories’ softkey. |
User Interface |
VOIP-108570 |
5.4.2 |
Recent call list displays the Umlaut correctly while using LYNC Base Profile and Exchange on VVX 500 and 600 phones. |
User Interface |
VOIP-108489 |
5.4.2 |
The phone web interface displays contacts in the same order as on the phone display. |
User Interface |
VOIP-107262 |
5.4.2 |
The search field of the Broadsoft Directory supports ‘*’ and ‘#’ keys. |
Video |
VOIP-107706 |
5.4.2 |
Substantial video quality improvement on VVX 1500 phones for H.323 bridge calls. |
VQMon |
VOIP-111493 |
5.4.2 |
Voice Quality score, NLR and MOSQ are now improved to match the RX RTP traffic |
Lync |
VOIP-106843 |
5.4.2 |
VVX phones now register after failover/failback.to the secondary server when the second server details are added tin the DNS server after the phone is registered |
General |
VOIP-109240 |
5.4.2 |
The exchange calendar integration configuration parameter feature.exchangeCalendar.enabled now controls all other Exchange integrations |