Plantronics + Polycom. Now together as Poly Logo

Sound Station IP 7000 : Updater: 5.0.1

SOLVED
francesco1609
Advisor

Sound Station IP 7000 : Updater: 5.0.1

Dear all,

 

facing an issue with integrating the Voice station with an HDX I had the need to update the firmware to the versino 5.0.1.

Unfortunately now, the web interface doesnt seem to let me confiure SIP parameters.

Any time I make a change, the web page tells me I need to reboot the station, but then the configuraiton is the way I left it.

 

Is it possible there is a conflict with a previuos config file existing in the Station's flash.

Al updates of the same major releases infact kept working without any changes in the modifications, when I steped to the new major release, the previuos configuration didnt work anymore, requiring me to input a new one. But it doesnt save it.

 

Any ideas?

Thanks,

Francesco

 

Message 1 of 4
1 ACCEPTED SOLUTION

Accepted Solutions
francesco1609
Advisor

Re: Sound Station IP 7000 : Updater: 5.0.1

Dear All,

 

It turned out to be a problem with the old config file.

A factory reset after the upgrade fixed the issue.

 

Francesco

 

View solution in original post

Message 4 of 4
3 REPLIES 3
francesco1609
Advisor

Re: Sound Station IP 7000 : Updater: 5.0.1

Just to be more specific,

from the Quick Setup menu, I am unable to modify the SIP outbound proxy.

When I go on the parameter and input both the server and the port, on the right panel, where it shows the local/web/CMA parameters, they remain empty even after filling the values....

 

Is this a bug of the web config page?

How can I create a sip.cfg file to put into the FTP server?

 

Thank you,

Francesco

 

Message 2 of 4
francesco1609
Advisor

Re: Sound Station IP 7000 : Updater: 5.0.1

Hi All,

 

please refer to the screenshot below, where you can see the field populated in the left, and showing blank on the right:

 

Message 3 of 4
francesco1609
Advisor

Re: Sound Station IP 7000 : Updater: 5.0.1

Dear All,

 

It turned out to be a problem with the old config file.

A factory reset after the upgrade fixed the issue.

 

Francesco

 

View solution in original post

Message 4 of 4