How can I preset an individual name , for example like the computername in a PC or notebook , for the IP6000.
I configured the IP6000 with DHCP enable and after connect the IP6000 to the network it gets a IP-Address and a host/computername from the DHCP-Server, so my question is, can I control the host/computername for the IP6000.
Thank you for helping.
Solved! Go to Solution.
welcome to the Polycom Community.
According to the UCS 4.0.1 Admin Guide (unsure what software you have installed) there is a parameter for the hostname.
<device device.set="1" device.host.hostname.set="1" device.host.hostname="yourhostname" />
Above is an example how you would usually activate this but I have never tested this myself.
The community contains a FAQ that should explain how to load this part and the community search can be used in addition.
Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.
Polycom Global Services
Thank you for answering,
the IP6000 comes with UC Software Version 3.3.4.0085 and BootROM Version 4.3.1.0440,
is this also possible?
according to your answer I will test the configuration to set the hostname.