Plantronics + Polycom. Now together as Poly Logo

Soundpoint 331 Paging Softkey

SOLVED
pkenney-kbh
Occasional Visitor

Soundpoint 331 Paging Softkey

I have looked through the admin manual and forum searches and have not been able to find out if this is possible. I am looking for the ability to enable paging so the phone receives pages, but I want to hide the paging softkey. 

 

On a similar note, is it possible to disable the "End Page" softkey? We don't want users to be able to hangup on the page.

 

 

 

Thanks

Message 1 of 2
1 ACCEPTED SOLUTION

Accepted Solutions
SteffenBaierUK
Polycom Employee & Community Manager

Re: Soundpoint 331 Paging Softkey

Hello pkenny-kbh,

welcome to the Polycom Community.

To my knowledge this is currently not a feature that is implemented.

 

Please follow this FAQ post here:

 

Jan 03, 2013 Question: How can I request a change to the current Polycom SIP / UCS Software?

Resolution: Please check => here <=


Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services

----------------
The title Polycom Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. All posts and words are my own & do not represent the views of Employer.

----------------

Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.
Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

View solution in original post

Message 2 of 2
1 REPLY 1
SteffenBaierUK
Polycom Employee & Community Manager

Re: Soundpoint 331 Paging Softkey

Hello pkenny-kbh,

welcome to the Polycom Community.

To my knowledge this is currently not a feature that is implemented.

 

Please follow this FAQ post here:

 

Jan 03, 2013 Question: How can I request a change to the current Polycom SIP / UCS Software?

Resolution: Please check => here <=


Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services

----------------
The title Polycom Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. All posts and words are my own & do not represent the views of Employer.

----------------

Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.
Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

View solution in original post

Message 2 of 2