Plantronics + Polycom. Now together as Poly Logo

Soundpoint 650 Programming

Occasional Visitor

Soundpoint 650 Programming

I'm looking for some simple programming instructions for the following tasks:


1) Setup a softkey from the main screen to the company directory on SP IP450s

2) Setup Operator call status  for all users on SP IP650 with sidecar


My SIP provider recommended these phones, and I'm starting to regret it over how difficult configuring them seems to be.


Any help would be appreciated.

Message 1 of 2
Polycom Employee & Community Manager

Re: Soundpoint 650 Programming

Hello schneidercom,


welcome to the Polycom Community.


We encourage all users to check the FAQ as both EFK => here <= and BLF => here <= is already outlined in detail.


Your Polycom Reseller should be the first person to contact in case you are running into technical difficulties as they have sold you the Item.


Feel free to utilize the search facility as all above has been discussed already in the VoIP Section on plenty of other occasions.


Best Regards


Steffen Baier


Polycom Global Services



The title Polycom Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. All posts and words are my own & do not represent the views of Employer.


Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.
Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's
Message 2 of 2