Plantronics + Polycom. Now together as Poly Logo

Soundstation IP 6000 outbound calling failure

Occasional Visitor

Soundstation IP 6000 outbound calling failure

Has anyone ever experienced an issue with outbound calls failing to complete after hanging up a previous call? We have an end user reporting an issue where they attempt to make an outbound call directly after hanging up an active call and the call just fails to complete regardless of the extension/number dialed. They have to wait up to a minute or more before they can make another outbound call. NOC engineers have advised they are not seeing the sequence number change on the second outbound call but unable to isolate what would be causing the issue. Firmware is 4.0.8 and we are unable to recreate using a different manufacturer conference unit in same location. 

Message 1 of 3
Polycom Employee & Community Manager

Re: Soundstation IP 6000 outbound calling failure

Hello @TB2004 ,


welcome to the Poly Community.

Please check => here <=

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

<======== Signature / Disclaimer ========>
Please be aware:For questions about the type of support to expect please check here

Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

The title Polycom Employee & Community Manager is an automatic setting within the community and any forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Poly employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and maybe answered on weekends, bank holidays or personal holidays.
Message 2 of 3
Occasional Visitor

Re: Soundstation IP 6000 outbound calling failure

Thank you for the prompy reply and link to the suggested resource. Upgrading the firmware to Version: (RevD) resolved my issue. Thanks.

Message 3 of 3