Plantronics + Polycom. Now together as Poly Logo

Strange BLF key behavior

Occasional Contributor

Strange BLF key behavior

I've set up a BLF key on extension 1005 to monitor 1001.  When a call comes into 1001 and it starts ringing the blf key on 1005 lights up solid red immediately which I believe means that 1001 is busy but not necessarally ringing.  1005 never presents the ringing popup and I cannot intercept the call by pushing the blf key which instead initiates a call to 1001 as if the call had already been answered.

 

I'm running a vvx600 on 1001 and a vvx400 on 1005.  Both have Firmware 5.7 and my pbx is a Grandstream ucm6204.

The relivent blf key settings on 1005 are:

 

 

attendant.behaviors.display.remoteCallerID.normal="1"
attendant.behaviors.display.remoteCallerID.automata="1"
attendant.behaviors.display.spontaneousCallAppearances.automata="1"
attendant.behaviors.display.spontaneousCallAppearances.normal="1"
attendant.resourceList.1.label="Main"
attendant.resourceList.1.address="1001@192.168.0.39"

feature.directedCallPickup.enabled="1"
call.directedCallPickupMethod="legacy"
call.directedCallPickupString="**"

 

I did a packet capture and I do see a SIP packet to the 1005 phone indicating <state>early</state> which suggests to me that the pbx is doing the right thing and the phone really should know that 1001 is ringing.  Here is the body of the initial SIP Notify that gets sent to 1005 when 1001 starts ringing:

<?xml version="1.0" encoding="UTF-8"?>
<dialog-info xmlns="urn:ietf:params:xml:ns:dialog-info" version="6" state="full" entity="sip:1001@203.0.113.81:5060">
 <dialog id="1001">
  <state>early</state>
 </dialog>
</dialog-info>

 

I don't really know at this point if I'm dealing with a phone config issue or a pbx config issue so I'd appreciate any suggestions.

 

Message 1 of 4
3 REPLIES 3
Polycom Employee & Community Manager

Re: Strange BLF key behavior

Hello @nmos,

welcome back to the Polycom Community.

Both the attendant.behaviors.display.spontaneousCallAppearances.automata and attendant.behaviors.display.spontaneousCallAppearances.automata would usually be disabled.

 

Can you re-test with the factory default settings?


Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services




<======== Signature / Disclaimer ========>
Please be aware:For questions about the type of support to expect please check here

Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

The title Polycom Employee & Community Manager is an automatic setting within the community and any forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Poly employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and maybe answered on weekends, bank holidays or personal holidays.
Message 2 of 4
Occasional Contributor

Re: Strange BLF key behavior

I tried eliminating all of the attendant.behaviors.... lines but I'm still seeing the same behavior.

Message 3 of 4
Polycom Employee & Community Manager

Re: Strange BLF key behavior

Hello @nmos,

If nobody else in the community has any other ideas the next step would be to open a ticket.


In order to raise a support ticket you need to work with your Polycom reseller as they need to do this for you.

End Customers are unable to open a ticket directly with Polycom support.

If this is some sort of an Internet discounter please post either your phone's MAC address or your Polycom devices serial so I can look up who would be able to support you. This may not be who you purchased the Polycom device from.

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services




<======== Signature / Disclaimer ========>
Please be aware:For questions about the type of support to expect please check here

Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

The title Polycom Employee & Community Manager is an automatic setting within the community and any forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Poly employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and maybe answered on weekends, bank holidays or personal holidays.
Message 4 of 4