Plantronics + Polycom. Now together as Poly Logo

Transfer key on 550

Highlighted
Occasional Advisor

Transfer key on 550

Hi all,

I have no problems adding a softkey for blind transfer but when I disable the basic functions with oftkey.feature.basicCallManagement.redundant="0"

 

and make the hard key do blind transfer too as below

<keys key.scrolling.timeout="1"

key.IP_550.37.function.prim = "SoftKey2"
key.IP_650.37.function.prim = "SoftKey2"
/>

 

The disabled basic function softkeys hold, transfer,conference appear automatically again although I have explicitly disabled them as above, can anyone help please?

Message 1 of 2
1 REPLY 1
Highlighted
Polycom Employee & Community Manager

Re: Transfer key on 550

Hello ,

welcome to the Polycom Community.

 

Can I suggest that future posts contain the phones software version?

Quote from the UCS 3.3.0 Admin Guide:

 

softkey.feature.basicCallManagement.redundant
 

If set to 0 and the phone has hard keys mapped for Hold, Transfer, and Conference functions (all must be mapped), all of these soft keys are not displayed. If set to 1, all of these soft keys are displayed.


If you remove the Softkeys the hard keys must be left alone.

 

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services

----------------
The title Polycom Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. My official "day" Job is 3rd Level support at Poly but I am unable to provide official support via the community.

----------------

Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.
Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's
Message 2 of 2