Hello!
We are using Trio 8800 paired with Visual+ or VisualPro. We've seen, that each Trio and each Visual+ generates network traffic to Polycom Cloud 104.210.158.192 by default, which will be blocked by our firewalls. We are provisioning the Polycom devices by RPRM on-premise and do not use any Polycom Cloud Service, so there is no use for that traffic.
To prevent this traffic and to reduce network load, on RPRM we've set the configuration attributes feature.da.enabled="0", feature.obitalk.enabled="0" and feature.pcc.enabled="0" for each Trio.
Now there is network traffic left from Visual+ to Polycom Cloud. Please tell me, how to eliminate this traffic too.
Best regards,
LeoK
Solved! Go to Solution.
Hello @LeoK
I double-checked this prior to replying and this is working as designed.
The Cloud features are not disabled on the Visual+ if turned off on the Trio side. You will need to manually login to each Visual+ and load a configuration to disable this.
Best regards
Steffen Baier
Hello @LeoK ,
Welcome back to the Poly Community.
Simply set the same configuration on the Visual+. Usually, the configuration is shared to the Visual+ but I assume there is some analytics being sent by the Visual+ as well so try importing the CFG via the Web Interface.
If you require official guidelines we would need to see this in support.
In order to raise a support ticket, you need to work with your Poly reseller as they may need to do this for you.
End Customers are usually unable to open a ticket directly with Poly support. Available End User Poly services offerings are detailed here
If this is some sort of an Internet discounter providing your MAC address or your Poly devices serial will enable us to look up who would be able to support you. This may not be who you purchased the Poly device from.
Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.
Best Regards
Steffen Baier
Hello @LeoK
I double-checked this prior to replying and this is working as designed.
The Cloud features are not disabled on the Visual+ if turned off on the Trio side. You will need to manually login to each Visual+ and load a configuration to disable this.
Best regards
Steffen Baier