Plantronics + Polycom. Now together as Poly Logo

Trio firmware 5.9 and h.323

Highlighted
Occasional Contributor

Trio firmware 5.9 and h.323

Hi,

 

I know that the H.323 feature is not officially supported on the Trio but I hope someone can help me here.

 

I'm trying to use this feature, I have enable H.323 on third line (1st one is SfB, second is a SIP one). I have set a Gatekeeper with auth settings,etc... However, when I make a h323 call with an alias (for example 5000), the call is sended through the Gatekeeper, everything is fine. However, If I make a call using a hostname or an IP (with h323:xxxx), the Trio try to send to call directly to this IP or hostname without passing by the Gatekeeper.

 

Do you know any settings that can change this behaviour?

 

Best regards,

 

Cyrille

Message 1 of 8
7 REPLIES 7
Highlighted
Occasional Contributor

Re: Trio firmware 5.9 and h.323

Another comment, If I call abcd@ip, the call is correctly routed through the GK.

 

So calling:

 

alias (ex: 5000) - OK

"email format" (ex: abcd@1.2.3.4) - OK

IP (ex: 1.2.3.4) - Not OK

Hostname (ex: test) - Not OK

Message 2 of 8
Esteemed Contributor

Re: Trio firmware 5.9 and h.323

Hi @Ziki,

 

what are your settings? I just configured settings > H.323 and enabled H.323 protocol and filled in our DMA-IP as the gatekeeper. After that configured Line 4, disabled SIP, enabled H.323, filled in Gatekeeper IP (DMA) and made the settings for identification (Display name=8800, Address=8800 and Label=IP Call). Runs nice and smooth. All types of calls worke fine.

 
Message 3 of 8
Highlighted
Occasional Contributor

Re: Trio firmware 5.9 and h.323

Thank you for your answer.

 

I have the same settings as you.

 

Have you set any digitmap for your h323 line?

 

How are you doing to call an IP? You press on "IP Call", tap on the keyboard icon, keyboard appear with "h323:" and you type the IP address?

Message 4 of 8
Highlighted
Esteemed Contributor

Re: Trio firmware 5.9 and h.323

No digitmap and yes, same way you decribed to initiate an IP call.

Message 5 of 8
Highlighted
Advisor

Re: Trio firmware 5.9 and h.323

hi , can i have your setting picture on your Trio. Thank you

Message 6 of 8
Highlighted
Polycom Employee & Community Manager

Re: Trio firmware 5.9 and h.323

Hello @hiep.nguyen ,

 

welcome to the Poly Community


Have a look at this post here


Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

----------------

Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.
Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's
Message 7 of 8
Highlighted
Polycom Employee & Community Manager

Re: Trio firmware 5.9 and h.323

Hello @Ziki @hiep.nguyen @mschulze ,

 

Trio GA support of H.323 in 5.9.1 >here<

 

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

----------------

Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.
Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's
Message 8 of 8