Solved: Types of BLA/SLA support in polycom phones?

Harishyadav1465 · ‎12-19-2018

Hello,

Recently we are working on the RFC 7463 for BLA/SLA.I just want to know whether this RFC is supported in polycom phones or not as we want to implement it with polycom phones.

If it supporting leave some traces of it .If no what are the types BLA/SLA is it supporting?

FYI:Polycom supporting the draft-ani-bla-02.txt for sure as we are using it.

BR

Harish

SteffenBaierUK · ‎12-19-2018

Hello @Harishyadav1465,

welcome back to the Polycom Community.

Again a post should contain information about current software, SIP Server details etc. but to answer your question the Admin Guide matching the software version usually lists the RFC's we support.

This is a public facing document so easily available.

In addition we do have non public facing documentation for which you can potentially get access whilst working with a Polycom sales Engineer as this may require a NDA to be signed.

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services

<==== Signature / Disclaimer ======>
Please be aware:For questions about the type of support to expect please check here

Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

This forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Poly employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and may be answered on weekends, bank holidays or personal holidays.

Harishyadav1465 · ‎12-19-2018

Hello Steffen,

FYI: I have been reading the Admin Guides of Every polycom firmware however I found out that after UC 5.5 , polycom not mentioning about the RFC support.

If you have any doubt ,check yourself on the LATEST UC 5.9 admin guide.

BR

Harish

SteffenBaierUK · ‎12-19-2018

Hello @Harishyadav1465,

I will check this internally and open a Document Bug for this. Most likely, as you still keep the make and model of your SIP switch for yourself, you will need to work with a Polycom sales engineer to get potential access to the NDA documentation.

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services

<==== Signature / Disclaimer ======>
Please be aware:For questions about the type of support to expect please check here

Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

This forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Poly employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and may be answered on weekends, bank holidays or personal holidays.

Types of BLA/SLA support in polycom phones?

Types of BLA/SLA support in polycom phones?

Re: Types of BLA/SLA support in polycom phones?

Re: Types of BLA/SLA support in polycom phones?

Re: Types of BLA/SLA support in polycom phones?