I'm working with VVX-300 / 301 with UCS 5.4.4 and I try to configure the phones for a specific timezone, but it always displays time in the NTP server timezone.
I have tried these parameters in the config files but without any results, whereas while doing it through phone web interface, it works well.
what is wrong in my syntax ?
(i already check on other posts but did not find solution)
<device device.set="1" device.sntp.gmtOffsetcityID="83" /> <tcpIpApp.sntp tcpIpApp.sntp.resyncPeriod="86400" tcpIpApp.sntp.address="126.96.36.199" tcpIpApp.sntp.address.overrideDHCP="1" tcpIpApp.sntp.gmtOffset="3600" tcpIpApp.sntp.gmtOffset.overrideDHCP="1" tcpIpApp.sntp.gmtOffsetcityID="83" />
Solved! Go to Solution.
welcome back to the Polycom Community.
Any Device parameter also needs to have the relevant set parameter.
Can you try and add:
Jan 28, 2013 Question: Time and Date flashing or unable to set time correctly
Resolution: Please check => here <=
should provide some help.
If this fails it would be of interest whe this last worked and the next step then would be to open a service ticket.
Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.
Polycom Global Services