Plantronics + Polycom. Now together as Poly Logo

Update firmware in small groups

SOLVED
Occasional Advisor

Update firmware in small groups

We currently have 300 vvx500 phones and 180 vvx300 phones. Is there a way to update the firmware on the phones in small groups. I am trying to avoid all phones trying to update at once when i put the new firmware on the ftp server. 

Message 1 of 9
8 REPLIES 8
Polycom Employee & Community Manager

Re: Update firmware in small groups

Hello @rkrick99,

welcome to the Polycom Community.

It is always useful to include the currently used UC Software version as issues experienced or a question asked may already be addressed in a newer release.

Please also include if you are using a SIP server or a LYNC / Skype for Business server.

If LYNC or Skype please provide Version details and if these are on premise of off premise

This also allows yourself and others to check against current software release notes, Administrator Guides or FAQ post’s.

The above is also stated in the "Must Read First" and is the absolute minimum requirement every new post should include. .

In addition providing us with this basic information gives Polycom an idea what Software Versions are used in the field and avoids wasting time trying to troubleshoot issues which have already been addressed.

Therefore the Polycom VoIP FAQ contains this post here:

Question: How can I find out my SIP or UC Software Version of my Phone?
Resolution: Please check here

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services




<======== Signature / Disclaimer ========>
Please be aware:For questions about the type of support to expect please check here

Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

The title Polycom Employee & Community Manager is an automatic setting within the community and any forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Poly employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and maybe answered on weekends, bank holidays or personal holidays.
Message 2 of 9
Occasional Advisor

Re: Update firmware in small groups

My appologies, I will remember to post software versions next time. We just use a sip server for our phones. We are using 2 different modles of phones, VVX500 at our HO and the VVX300 at our remote locations. We use UC ver 4.1.6 for the VVX500 and UC ver 5.2.7 for the VVX 300 phones. 

Message 3 of 9
Polycom Employee & Community Manager

Re: Update firmware in small groups

Hello @rkrick99,

none of these version are supported anymore as you should be on UC Software 5.8.0 or at least 5.7.2


The community's VoIP FAQ contains this post here:

 

Oct 7, 2011 Question: What is the relevance of the 000000000000.cfg or <mac>.cfg?

Resolution: Please check => here <=

 

The above explains how you can use this file and add additional groups or sections with providing the Phone model name aka _VVX300 to only apply a certain new software to VVX300 phones.

 

I also suggest to look at:

 

Nov 24, 2014 Question:How can the Phone automatically check / poll for configuration changes or new software versions?

Resolution: Please check => here <=

 

The above explains how you can use this to randomly use individual phones to try for a new software instead all at the same time.

 

In addition you could create individual <mac>.cfg file specifying a software so only the phones having an individual file would upgrade.

 

If you want something professional look at Polycom RealPresence Resource Manager or our new PDMS service.

 

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services




<======== Signature / Disclaimer ========>
Please be aware:For questions about the type of support to expect please check here

Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

The title Polycom Employee & Community Manager is an automatic setting within the community and any forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Poly employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and maybe answered on weekends, bank holidays or personal holidays.
Message 4 of 9
Occasional Advisor

Re: Update firmware in small groups

I am not sure why but I setup the polling inteval on the vvx300 phones and tested it and the phone updated. I set the sam setting in the vvx500 and it does not seem to work. Is there any other setting that may cancel out the poll settings. 

Message 5 of 9
Polycom Employee & Community Manager

Re: Update firmware in small groups

Hello @rkrick99,

You have neither attached any logs or the configuration used or a backup.

 

I suggest you compare a backup of a working phone and then maybe attach some logs.

 

If you are still stuck open a ticket.


In order to raise a support ticket you need to work with your Polycom reseller as they need to do this for you.

End Customers are unable to open a ticket directly with Polycom support.

If this is some sort of an Internet discounter please post either your phone's MAC address or your Polycom devices serial so I can look up who would be able to support you. This may not be who you purchased the Polycom device from.

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services




<======== Signature / Disclaimer ========>
Please be aware:For questions about the type of support to expect please check here

Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

The title Polycom Employee & Community Manager is an automatic setting within the community and any forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Poly employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and maybe answered on weekends, bank holidays or personal holidays.
Message 6 of 9
Occasional Advisor

Re: Update firmware in small groups

FOr some reason the time was off on the phone, I have corrected the problem and I was able to get the phone to update. 

Message 7 of 9
Occasional Advisor

Re: Update firmware in small groups

My last question, is there a way to have the phones poll on a specific day of the week, we were looking to have either saturday or sunday? 

Message 8 of 9
Polycom Employee & Community Manager

Re: Update firmware in small groups

Hello @rkrick99,

the Polling FAQ is quite detailed. Everything else would be a feature request.

 

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services




<======== Signature / Disclaimer ========>
Please be aware:For questions about the type of support to expect please check here

Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

The title Polycom Employee & Community Manager is an automatic setting within the community and any forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Poly employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and maybe answered on weekends, bank holidays or personal holidays.
Message 9 of 9