Plantronics + Polycom. Now together as Poly Logo

VVX-250 OBi Edition Revert to UC

SOLVED
Highlighted
Occasional Advisor

VVX-250 OBi Edition Revert to UC

Is it possible to revert an OBi-Edition VVX-250 to the standard UC software and interface? 

Message 1 of 4
1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Polycom Employee & Community Manager

Re: VVX-250 OBi Edition Revert to UC

Hello @Raxx ,

 

Welcome to the Polycom Community.


to my personal knowledge End Customers are unable to do this and we cannot provide any warranty on the device if this fails.

 

Instructions can be found >here< and please use at your own risk.

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services

----------------

Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.
Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

View solution in original post

Message 2 of 4
3 REPLIES 3
Highlighted
Polycom Employee & Community Manager

Re: VVX-250 OBi Edition Revert to UC

Hello @Raxx ,

 

Welcome to the Polycom Community.


to my personal knowledge End Customers are unable to do this and we cannot provide any warranty on the device if this fails.

 

Instructions can be found >here< and please use at your own risk.

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services

----------------

Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.
Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

View solution in original post

Message 2 of 4
Highlighted
Occasional Advisor

Re: VVX-250 OBi Edition Revert to UC

I used tftpd64 as a local ftp server and used tftp instead of http and followed the rest of the steps and that worked for me,

 

Thanks Steffen!

Message 3 of 4
Occasional Visitor

Re: VVX-250 OBi Edition Revert to UC

I cannot get this to work for anything in the world.  I'm not familiar with TFTP, but I did use an ftp server that I created and no matter what I do, it just never reverts back to the UCS.  Raxx, would you mind giving a step by step on how you used TFTP to get it done?

Message 4 of 4