Plantronics + Polycom. Now together as Poly Logo

VVX 311 Phones won't accept DHCP address

Occasional Visitor

VVX 311 Phones won't accept DHCP address

We are replacing CX600 phones with VVX 311 phone and are running into a problem where the new VVX311 phones sometimes do not accept DHCP offers from our servers. We have switch policy that auto-assigns LLDP-MED and we see the device identified and the correct VLAN tagged on the switch automatically. The old CX600s work flawlessly and the VVX311s only sometimes work. We have moved phones from one port to another, and then replaced them, and cannot find a consistent location-based problem. Phones with the issue would then start working at random points. I found a similar issue with VVX411 listed with Extreme for Enterasys switches, but firmware notes listed the issue as fixed as of 5.3.XX


Out of the box firmware : 

Enterasys Switches:  c5k-series

Skype for Business Cloud services for VOIP service.

Message 1 of 2
Polycom Employee & Community Manager

Re: VVX 311 Phones won't accept DHCP address

Hello @tylerb,

welcome to the Polycom Community.


The VVX phones in comparison with the CX phones have far more sophisticated method's of discovering VLAN's as an example using CDP,LLDP or even DHCP so you may not be able to compare them side by side.

The community's VoIP FAQ contains this post here:

Aug 24, 2015 Question:What basic network data is send and received by a Polycom phone?

Resolution: Please check this post => here <=




Oct 17, 2011 Question: How can change Logging Levels or use Syslog?

Resolution: Please check => here <=

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services

<======== Signature / Disclaimer ========>
Please be aware:For questions about the type of support to expect please check here

Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

The title Polycom Employee & Community Manager is an automatic setting within the community and any forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Poly employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and maybe answered on weekends, bank holidays or personal holidays.
Message 2 of 2