I'm wondering how to setup properly VVX to use CA certificate (is installed on phone) which will be used for authentication (ISE will authorize endpoint).
I read already TB: 57352 and one thing which confiusing me are credentials for EAP - where those creds should be additional configured (AD, ISE)?
Please advice what is the proper way to configure 802.1X on VVX 411 and connect this with ISE to establish proper authenication.
Thank you for your effort and support.
welcome to the Polycom Community.
Both the community's Must Read First and the community's FAQ reference the basic minimum information a new or follow up post should contain.
This ensures the questions having to be asked are limited and any new or follow up post contains the right amount of details to ensure any voluntary participant within the community does not spend additional time chasing basic information.
As a reminder the basic information asked for:
UC Software 4.0.0 or later via the Web Interface Utilities > Phone Backup & Restore > Phone Backup > Phone Backup
Whilst providing some of these details may not directly impact any possible answer the community can provide, it does enable Polycom to have an overview of the current software used. In addition other details allow us to check logs or look up a potential support partners if an issue needs to come into support. It also enables us to verify the entitlement for using features.
In addition please ensure you always check the FAQ's and/or utilize the community search before posting any new topics or follow up post’s.
Jun 25, 2012 Question: How can I add a 802.1x EAP-PEAPv0/MSCHAPv2 Certificate?
Resolution: Please check => here <=
Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.
Polycom Global Services