Plantronics + Polycom. Now together as Poly Logo

VVX 500 MWI does not work

plaurent
Occasional Contributor

VVX 500 MWI does not work

MWI works just fine for the IP650, why doesn't it work for the same configuration (same account) on a VVX 500?

Message 1 of 2
1 REPLY 1
SteffenBaierUK
Polycom Employee & Community Manager

Re: VVX 500 MWI does not work

Hello plaurent,

it is always useful if users state the current software version of the device they are having issues with.

 

I am not aware of any open bug's with MWI but would suggest that you check the current UCS 4.0.2 Rev B release notes against your own software in order to check if you can find an open ticket.

 

You could also use a script like this => here <=

 

Above 3rd Party script sends MWI On or Off to a phone.

 

If you are still unable to get this working I strongly suggest to contact your Polycom reseller to raise a Ticket with Polycom Support.

 

Please provide them with a Wireshark trace for both Phones and the configuration you have used and the <mac>-app.log and <mac>-boot.log.


Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services

----------------
The title Polycom Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. All posts and words are my own & do not represent the views of Employer.

----------------

Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.
Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's
Message 2 of 2