Plantronics + Polycom. Now together as Poly Logo

VVX 500 incoming SIP Video


VVX 500 incoming SIP Video

Good afternoon,


I have been told that the VVX500 was able to receive SIP video even without the webcam.


However, I do not find the setting to enable incoming video.


Is that actually feasible or not ?


Do we need the webcam to enable incoming/outgoing video or is it possible to receive incoming video without the webcam ?

Message 1 of 2
Polycom Employee & Community Manager

Re: VVX 500 incoming SIP Video

Hello dsandras,


the Camera support was added in UCS 4.1.3. I just tested a VVX500 without camera attached and called from a VVX1500 and had incoming video.


Maybe you are simply not running the correct version?


For any follow up please work with your Polycom reseller.


Best Regards


Steffen Baier

<======== Signature / Disclaimer ========>
Please be aware:For questions about the type of support to expect please check here

Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

The title Polycom Employee & Community Manager is an automatic setting within the community and any forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Poly employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and maybe answered on weekends, bank holidays or personal holidays.
Message 2 of 2