Plantronics + Polycom. Now together as Poly Logo

VVX 501 can't manually dialout

Highlighted
Occasional Visitor

VVX 501 can't manually dialout

Hello everyone,

 

  I have a VVX 501 phone that does not manually dial out. It's provisioned correctly but when I try to manually dial out it won't do anything. My dialplan is [2-9]11|0T|011xxx.T|[0-1][2-9]xxxxxxxxx|[2-9]xxxxxxxxx|[2-9]xxxT

Message 1 of 6
5 REPLIES 5
Highlighted
Polycom Employee & Community Manager

Re: VVX 501 can't manually dialout

Hello @Tommycpu ,

 

Welcome to the Poly Community.

As a reminder both the communities Must Read First and the FAQ reference the basic minimum information a new or follow up post should contain.

This ensures the questions having to be asked are limited and any new or follow up post contains the right amount of details to ensure any voluntary participant within the community does not spend additional time chasing basic information.

As a reminder the basic information asked for:

 

  • Provide the exact Software Version of your Phone
  • Provide the Phone Model
  • Provide the Call Platform (aka openSIP,Teams, Skype for Business Online, Skype for Business on Premise, Lync, Zoom, BlueJeans and/or Hybrid Registration)
  • Provide details if UC / SIP or ObiEdition
  • Additional Poly Infrastructure (RPRM,PDMS or BToE)
  • If applicable provide a backup of the phone in question

UC Software 4.0.0 or later via the Web Interface Utilities > Phone Backup & Restore > Phone Backup > Phone Backup. Please rename into .TXT or Zip the file to attach.
Since UC Software 5.9.0 simply provide this via the Web Interface Diagnostics > Download Support Information Package

  • If possible provide a Log and either attach them or use the Code Tag.Consult the Troubleshooting Section found within the FAQ if applicable
  • If possible provide the MAC Address or Serial of the device
  • Provide details for example if the issue is a day 1 issue or only happened after an upgrade or any other relevant details
  • For questions around Support please check here

 

Whilst providing some of these details may not directly impact any possible answer the community can provide, it does enable Poly to have an overview of the current software used. In addition, providing all details at the same time allows us to check logs or look up potential support partners if an issue needs to come into support. It also enables us to verify the entitlement for using features.


Please ensure you always check the FAQ's and/or utilize the community search before posting any new topics or follow up posts.

 

Oct 7, 2011 Question: Phone unable to Dial a number when Off Hook or on 2nd Call in a Conference or Digitmap issues

Resolution: Please check => here <=


Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

----------------
The title Polycom Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. My official "day" Job is 3rd Level support at Poly but I am unable to provide official support via the community.

----------------

Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.
Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's
Message 2 of 6
Highlighted
Occasional Visitor

Re: VVX 501 can't manually dialout

Phone Information

Phone Model VVX 501

Part Number 3111-48500-001 Rev:A

MAC Address 64:16:7F:11:A0:81

IP Address 192.168.1.41

UC Software Version 5.4.2.6345

Updater Version 5.6.2.5511

Message 3 of 6
Highlighted
Polycom Employee & Community Manager

Re: VVX 501 can't manually dialout

Hello @Tommycpu ,

 

As you have not provided the community with any useful information you would need to open a ticket. In addition, your currently used software is outdated.

 

In order to raise a support ticket, you need to work with your Poly reseller as they may need to do this for you.

End Customers are usually unable to open a ticket directly with Poly support.

Our records show the unit was sold via SCANSOURCE INC back in 09/03/2017.

 

From the age, we assume it must have worked at some point.


As the unit is no longer within the warranty please be prepared to Pay Per Incident / PPI. This is all outlined in detail here

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

----------------
The title Polycom Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. My official "day" Job is 3rd Level support at Poly but I am unable to provide official support via the community.

----------------

Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.
Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's
Message 4 of 6
Highlighted
Occasional Visitor

Re: VVX 501 can't manually dialout

Okay thank what software version do you suggest?

Message 5 of 6
Polycom Employee & Community Manager

Re: VVX 501 can't manually dialout

Hello @Tommycpu ,

 

Details about the latest software can be found >here<

 

I suggest you test this and then follow this up as already explained.

 

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

----------------
The title Polycom Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. My official "day" Job is 3rd Level support at Poly but I am unable to provide official support via the community.

----------------

Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.
Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's
Message 6 of 6