Plantronics + Polycom. Now together as Poly Logo

VVX 600 Error when using web interface to Software Upgrade from Polycom Hosted Server

SOLVED
Highlighted
Occasional Contributor

VVX 600 Error when using web interface to Software Upgrade from Polycom Hosted Server

I am using the web interface to Software Upgrade my VVX 600 from the Polycom Hosted Server, but I keep getting the same "The XML file you specified cannot be read. Contact your Polycom Hosted Server Administrator" error every time I click "Check for Updates."

Since I am using the Polycom Hosted Server, I thought I'd bring this to your attention. Here are the specifics on my device:

Phone Model: VVX 600
Part Number: 3111-44600-001 Rev:A

UC Software Version: 5.5.0.20556

Updater Version: 5.7.0.18267

Message 1 of 3
1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Polycom Employee & Community Manager

Re: VVX 600 Error when using web interface to Software Upgrade from Polycom Hosted Server

Hello jeff@bluip ,

Welcome back to the Poly community.

Some or a couple of your old post(s) or reply(s) to them => here <= are still open/pending as you have not marked these as "Accept as a solution" or at least provide some form of feedback or answer.

If they are in this state nobody finding them via a community search will know if an answer or advice provided was useful and has maybe helped you.

Could you therefore kindly go over them and mark or answer as appropriate?

If they are marked as "Accept as a solution" other users can find these easier and it helps them to utilize the community more efficiently. Please do not simply mark them without any type of feedback.

 

For your new issue please ensure you always check the FAQ's and/or utilize the community search before posting any new topics or follow up posts.

 

Apr 21, 2015 Question: Unable to upgrade the Phone via the built in Software Upgrade Web Interface utility

Resolution: This was a bug and was addressed.Please setup a local provisioning server as shown => here <=. Check the release notes for VOIP-97822 and was fixed in 5.5.2 or 5.3.1 or later.

 

and

 

May 11, 2018 Question: Why do I get a "Failed to fetch available software from the Poly hosted server" error message or able to download list but unable to upgrade/downgrade?

Resolution: Please ensure your firewall allows outbound network traffic as shown  => here <=


Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

----------------
The title Polycom Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. My official "day" Job is 3rd Level support at Poly but I am unable to provide official support via the community.

----------------

Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.
Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

View solution in original post

Message 2 of 3
2 REPLIES 2
Highlighted
Polycom Employee & Community Manager

Re: VVX 600 Error when using web interface to Software Upgrade from Polycom Hosted Server

Hello jeff@bluip ,

Welcome back to the Poly community.

Some or a couple of your old post(s) or reply(s) to them => here <= are still open/pending as you have not marked these as "Accept as a solution" or at least provide some form of feedback or answer.

If they are in this state nobody finding them via a community search will know if an answer or advice provided was useful and has maybe helped you.

Could you therefore kindly go over them and mark or answer as appropriate?

If they are marked as "Accept as a solution" other users can find these easier and it helps them to utilize the community more efficiently. Please do not simply mark them without any type of feedback.

 

For your new issue please ensure you always check the FAQ's and/or utilize the community search before posting any new topics or follow up posts.

 

Apr 21, 2015 Question: Unable to upgrade the Phone via the built in Software Upgrade Web Interface utility

Resolution: This was a bug and was addressed.Please setup a local provisioning server as shown => here <=. Check the release notes for VOIP-97822 and was fixed in 5.5.2 or 5.3.1 or later.

 

and

 

May 11, 2018 Question: Why do I get a "Failed to fetch available software from the Poly hosted server" error message or able to download list but unable to upgrade/downgrade?

Resolution: Please ensure your firewall allows outbound network traffic as shown  => here <=


Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

----------------
The title Polycom Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. My official "day" Job is 3rd Level support at Poly but I am unable to provide official support via the community.

----------------

Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.
Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

View solution in original post

Message 2 of 3
Highlighted
Polycom Employee & Community Manager

Re: VVX 600 Error when using web interface to Software Upgrade from Polycom Hosted Server

Hello jeff@bluip 

 

We had the same post >here< yesterday. We are looking into fixing this.

 

As a workaround setup a local provisioning server.

 

Best Regards

 

Steffen Baier

----------------
The title Polycom Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. My official "day" Job is 3rd Level support at Poly but I am unable to provide official support via the community.

----------------

Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.
Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's
Message 3 of 3