We're trialling the VVX 600 phones among other models for use in an upcoming Lync Enterprise voice rollout.
There is one issue that we'd like someone to comment on:
Most of our users add email distribution lists (MS Exchange 2013) to their Lync contact lists. Distribution group members are not able to be listed on our test phone.
Open the Lync contact list on the phone
Press the 'Groups' softkey
Select a distribution list
No group members are displayed and a message is on screen saying that the group is empty.
Is there a setting that we can change to make this work, or is this a defect?
welcome to the Polycom Community.
This may simply be working as designed. I am not at a liberty to share a future roadmap so you would require your Polycom reseller for more details on this.
Please be aware of the following when utilizing UCS 4.1.0 or later:
The use of Polycom UC Software versions 4.1.X (“Software”) requires the purchase of a separate Software license for every device that will use the Software in a Lync environment. You may not install, access, or use the Software in a Lync environment on more devices than are listed on your license until additional licenses have been purchased and authorized by Polycom. These licenses should be purchased from the same company from which you purchased the devices. You may operate devices against a Lync server for trial purposes for up to 30 days without purchasing a license. Use of the Software is subject to the terms and conditions of the End User License Agreement.
Polycom reserves the right to audit your deployment to verify that you have sufficient licenses to match the number of devices being used.
Information in regards of License Part Numbers can be found here
Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.
Polycom Global Services