Plantronics + Polycom. Now together as Poly Logo


Occasional Contributor


So I am trying to setup a Polycom VVX300 and I have the setup as follow


Each phone as Line 1 as an extension


What I am trying to do is us a parking lot 700 is transfer to


The slots are 701 702 703 ect..


I can get the phone to transfer to the slots and the BLFs function.  What I would like to do is change the BLF LED from a solid red to a flashing red led.  I am wondering if this is even possible.   If so can you point me in the right direction?  Perhaps an auto provision setting?


Below is my phone info


Phone Information
Phone ModelVVX 300
Part Number3111-46135-002 Rev:A
MAC Address00:04:F2:81:AC:B2
IP Address192.168.76.50
UC Software Version4.1.4.7430
BootROM Software Version5.1.4.0844
Message 1 of 2
Polycom Employee & Community Manager


Hello cbotts,

welcome to the Polycom Community.


Usually via a Notify from the SIP server the state of the call is documented.


Ringing or Early causes the LED to flash and dialog establish will cause the LED to be lit.


We have no official method of changing this in the software and a feature request would need to be raised via your Polycom reseller and a business case provided.

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services

The title Polycom Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. My official "day" Job is 3rd Level support at Poly but I am unable to provide official support via the community.


Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.
Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's
Message 2 of 2