Plantronics + Polycom. Now together as Poly Logo

VVX D60 no lines mapped

Highlighted
Frequent Advisor

VVX D60 no lines mapped

I have taken my VVX 600 and attached a D60 to it. Setup is quick and easy, just added this config:

 

feature.dect.enabled="1"
reg.1.terminationType="VVX-DECT"
VVXD60.Handset.1.outGoingLineIndex="1"
VVXD60.Handset.1.line.1="1"

 

Though the phone shows everything set up correctly the handset is not working. All I see on the handset is a zero. I can provision a second line and that seems to work fine, but I want the same extension on both the 600 and the D60.

 

7 REPLIES 7
Highlighted
Polycom Employee & Community Manager

Re: VVX D60 no lines mapped

Hello miken32,

welcome back to the Polycom Community.

It is always useful to include the currently used UC Software version as issues experienced or a question asked may already be addressed in a newer release.

This also allows yourself and others to check against current software release notes, Administrator Guides or FAQ post’s.

The above is also stated in the "Read First"

Therefore the Polycom VoIP FAQ contains this post here:

Question: How can I find out my SIP or UC Software Version of my Phone?
Resolution: Please check here

 

In addition did you check this:

 

May 04, 2016 Question:Are there any known VVX D60 Wireless Handset Limitations?

Resolution: Please check => here <= 

 

Hoteling, Busy Lamp Field (BLF), Enhanced Feature Keys, and Automatic Call Distribution (ACD) are not supported on the wireless handset, but these features are still available for the paired VVX business media phone.

An extension shared with the D60 Handset cannot use any of the above features (August 2016)


Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services

----------------
The title Polycom Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. My official "day" Job is 3rd Level support at Poly but I am unable to provide official support via the community.

----------------

Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.
Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's
Message 2 of 8
Highlighted
Frequent Advisor

Re: VVX D60 no lines mapped

I'm using the latest 5.4.4 release. This is a plain old SIP extension, not a BLF key or anything else.

 

The phone configuration looks like this:

        attendant.resourceList.2.address="7060"
attendant.resourceList.2.label="7060"

feature.dect.enabled="1" msg.mwi.1.subscribe="7040" msg.mwi.1.callBackMode="contact" msg.mwi.1.callBack="*97" reg.1.displayName="7040" reg.1.address="7040" reg.1.label="7040" reg.1.auth.userId="7040" reg.1.auth.password="xxxx" reg.1.lineKeys="1" reg.1.terminationType="VVX-DECT" VVXD60.Handset.1.outGoingLineIndex="1" VVXD60.Handset.1.line.1="1"

 

Message 3 of 8
Highlighted
Frequent Advisor

Re: VVX D60 no lines mapped

So after some experimentation, it seems that any BLF keys on the phone at all will cause this setup to fail. I've removed some BLF keys from the phone and it's working as expected. This is in contrast to what your much linked document says: "these features are still available for the paired VVX business media phone."

 

Here's where you tell me to open a ticket with my reseller, which I don't have one of, and everyone puts up with this being broken because Polycom can't be bothered to proactively fix problems their customers report.

 

Message 4 of 8
Highlighted
Polycom Employee & Community Manager

Re: VVX D60 no lines mapped

Hello miken32,

Please post your phone's MAC address so I can look up who would be able to support you.


Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services

----------------
The title Polycom Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. My official "day" Job is 3rd Level support at Poly but I am unable to provide official support via the community.

----------------

Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.
Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's
Message 5 of 8
Highlighted
Polycom Employee & Community Manager

Re: VVX D60 no lines mapped


@miken32 wrote:

 

 

Here's where you tell me to open a ticket with my reseller, which I don't have one of, and everyone puts up with this being broken because Polycom can't be bothered to proactively fix problems their customers report.

 


Hello miken32,

 

we have been over this in the past and I had explained this before but here we go again:

 

Mar 8, 2012 Question: What kind of support should I expect from the Community?
Clarification: Please check => here <=

 

The above explains this in detail and the longer you refuse to supply the MAC address the longer nobody will be able to help you.

 

Best Regards

 

Steffen Baier

----------------
The title Polycom Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. My official "day" Job is 3rd Level support at Poly but I am unable to provide official support via the community.

----------------

Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.
Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's
Message 6 of 8
Highlighted
Polycom Employee & Community Manager

Re: VVX D60 no lines mapped


@SteffenBaierUK wrote:

Hello miken32,

An extension shared with the D60 Handset cannot use any of the above features (August 2016)




Hello miken32,

 

in addition I already stated the above in my original reply.

 

If the Line from the VVX that is share with the D60 has any of the FAQ mentioned features the Line will not work on the D60.

 

If the VVX has another line registered and this line is monitoring a BLF then the D60 is not affected.

 

Please use the attendant.reg parameter to define another line.

 

Best Regards

 

Steffen Baier

----------------
The title Polycom Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. My official "day" Job is 3rd Level support at Poly but I am unable to provide official support via the community.

----------------

Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.
Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's
Message 7 of 8
Highlighted
Frequent Advisor

Re: VVX D60 no lines mapped

Ah, that's helpful information. The documentation doesn't make it clear that the extension to be shared on the D60 can't be subscribed to a BLF. I read it as saying you couldn't share the BLF line keys themselves to the D60. Thanks.

 

Phone MAC address 00:04:2F:84:1F:2C.

Message 8 of 8