Again I am unsure how this parameter would affect what the original poster started this topic with.
The parameter is used to enable insecure communication from a socket to send a message to the phone as shown => here <=
The reason for this required is also explained at the top of the post as since UC Software 5.3.0 or later we disabled the HTTP part and only allow HTTPS for the Web Interface as explained => here <=
Maybe your issue is as simple as activating HTTP back?
As you have not provided the currently used software version and we are unaware if Amego cannot support HTTPS and therefore require this to be off we are unable to help.
Some or a couple of your old post(s) or reply(s) to them => here <= are still open/pending as you have not marked these as "Accept as a solution" or at least provide some form of feedback or answer.
If they are in this state nobody finding them via a community search will know if an answer or advice provided was useful and has maybe helped you.
Could you therefore kindly go over them and mark or answer as appropriate?
If they are marked as "Accept as a solution" other users can find these easier and it helps them to utilise the community more efficiently. Please do not simply mark them without any type of feedback.
Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.
---------------- The title Poly Employee & Community Manager is a community setting and does not reflect my role. I am just a simple volunteer in the community like everybody else. All posts and words are my own & do not represent the views of Employer.
Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels. Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's