-
×InformationWindows update impacting certain printer icons and names. Microsoft is working on a solution.
Click here to learn moreInformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
-
×InformationWindows update impacting certain printer icons and names. Microsoft is working on a solution.
Click here to learn moreInformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
- HP Community
- Poly Phones
- Desk and IP Conference Phones
- VVX1500 Video errors
Create an account on the HP Community to personalize your profile and ask a question
12-10-2013 05:22 AM
Hi there
Having a bit of an issue with video between 2 x VVX1500's....
Noticed the following in the logs - any ideas on what they mean?:
1210103325|cap |4|00|[SoVidVideoCaptureManagerC::soYuvCapProcessEncodeMsg][ERROR] Display to preview/PIP window failed! failureCt=3, pipChannelOk=F, pipResizerOk=F, displayOk=F, pipChanState=Idle, camFrameAddr=0x452d6000, pipFrameBuf=0x0. 1210103325|cap |4|00|[SoVidDefaultCameraC::configureDevice][ERROR] Invalid encoder codec type () for camera. 000016.398|so |4|00|SoVideoIFrameRequesterC::instanceDestroy - unexpected state, instance was not initialized 1210103325|cap |4|00|[SoVidDefaultCameraC::open] Device successfully opened! ('drvCameraInit' succeed!)
Many thanks
Dave
Solved! Go to Solution.
Accepted Solutions
12-10-2013 07:55 AM
Ok I found out what my issue was!!....
We are using VVX's on a Broadsoft platform - when added the DTAF's didnt tick the video enabled box!
I could call video call a phone within the same subnet as it wasn't going through the AS however a phone in a different subnet means the AS will strip the video SDP off if that box is not ticked....
Also if your on Broadsoft just quickly check the AS will allow video calling:
AS_CLI/Interface/SIP> get
networkSupportVideo = true
Cheers
Dave
12-10-2013 05:26 AM
and also the following:
1210121820|cap |3|00|[SoVidVideoCaptureManagerC::soYuvCapProcessEncodeMsg] No buffer to send to DSP. count=1025 1210121901|cap |3|00|[SoVidVideoCaptureManagerC::soYuvCapProcessEncodeMsg] No buffer to send to DSP. count=2049 1210122022|cap |3|00|[SoVidVideoCaptureManagerC::soYuvCapProcessEncodeMsg] No buffer to send to DSP. count=4097 1210122306|cap |3|00|[SoVidVideoCaptureManagerC::soYuvCapProcessEncodeMsg] No buffer to send to DSP. count=8193
12-10-2013 05:58 AM
and also:
000033.201|cap |4|00|[SoVidDefaultCameraC::open] Device successfully opened! ('drvCameraInit' succeed!) 000033.205|cap |4|00|[SoVidDefaultCameraC::configureDevice][ERROR] Invalid encoder codec type () for camera. 000033.470|cap |4|00|[SspsVideoYuvCameraChanC::procMsgSoSspsYuvChanConfig] Camera device created, configured and is READY!! 000033.472|cap |4|00|[SoVidVideoCaptureManagerC::soYuvCapProcessEncodeMsg][ERROR] No active camera found! noActiveCameraChanCt=1 000033.474|cap |4|00|[SoVidVideoCaptureManagerC::soYuvCapProcessEncodeMsg][ERROR] Display to preview/PIP window failed! failureCt=1, pipChannelOk=F, pipResizerOk=F, displayOk=F, pipChanState=Open, camFrameAddr=0x43ef7000, pipFrameBuf=0x0. 000033.485|cap |4|00|[SoVidVideoCaptureManagerC::soYuvCapProcessEncodeMsg][ERROR] Display to preview/PIP window failed! failureCt=3, pipChannelOk=F, pipResizerOk=F, displayOk=F, pipChanState=Idle, camFrameAddr=0x440cd000, pipFrameBuf=0x0.
I can make a vid call from 1 VVX1500 to a VVX500 and thats fine - on setting logging to level 1 for video and making a test call again the following is seen:
1210125507|cap |3|00|[SoVidVideoCaptureManagerC::soYuvCapProcessEncodeMsg] No buffer to send to DSP. count=16385
UC Software Version 5.0.0.6874 BootROM Software Version 5.2.0.3747
12-10-2013 07:55 AM
Ok I found out what my issue was!!....
We are using VVX's on a Broadsoft platform - when added the DTAF's didnt tick the video enabled box!
I could call video call a phone within the same subnet as it wasn't going through the AS however a phone in a different subnet means the AS will strip the video SDP off if that box is not ticked....
Also if your on Broadsoft just quickly check the AS will allow video calling:
AS_CLI/Interface/SIP> get
networkSupportVideo = true
Cheers
Dave
Didn't find what you were looking for? Ask the community