Plantronics + Polycom. Now together as Poly Logo

VVX300 Softkey macro config

SOLVED
Highlighted
Valued Contributor

VVX300 Softkey macro config

Hi all

 

I need some help creating a softkey macro for the lock feature on the VVX300.  I have enabled the lock feature but for ease would like a softkey instead of going through the phone menu.  Currently running ver UCS 4.1.5.3284. 

 

  <phoneLock/>
   <phoneLock.enabled phoneLock.enabled="1" />
   <phoneLock.authorized.1.description phoneLock.authorized.1.description="Emergency Calls" />
   <phoneLock.authorized.1.value phoneLock.authorized.1.value="999" />
  <phoneLock/>

 

The above is working fine all i need is help or to be shown the softkey macro if thats ok??

 

Many thanks

 

Dave

Message 1 of 2
1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Valued Contributor

Re: VVX300 Softkey macro config

Hi again

 

I have managed to figure it out so have posted in case someone else decides they would like to also add this button:

 

in sys.cfg.template after <feature/>

 

<efk>
    <version efk.version="2" />
    <efklist
        efk.efklist.1.mname="Lock"
        efk.efklist.1.label="Lock"
        efk.efklist.1.status="1"
        efk.efklist.1.action.string="$FLockPhone$"
      />
    </efk>
  <softkey
     softkey.1.label="Lock"
     softkey.1.action="$FLockPhone$"
     softkey.1.enable="1"
     softkey.1.precede="1"
     softkey.1.use.idle="1"
   />

 

then in phone%25BWDEVICEID%25.cfg.template again after features:

 

  <phoneLock/>
   <phoneLock.enabled phoneLock.enabled="1" />
   <phoneLock.authorized.1.description phoneLock.authorized.1.description="Emergency Calls" />
   <phoneLock.authorized.1.value phoneLock.authorized.1.value="999" />
  <phoneLock/>

 

This will set the lock button first on the left before any default buttons and only allow authorized calls to the 999 emergency number while locked....

 

Hope this helps others out :)

 

Cheers

 

Dave

 

 

 

 

View solution in original post

Message 2 of 2
1 REPLY 1
Highlighted
Valued Contributor

Re: VVX300 Softkey macro config

Hi again

 

I have managed to figure it out so have posted in case someone else decides they would like to also add this button:

 

in sys.cfg.template after <feature/>

 

<efk>
    <version efk.version="2" />
    <efklist
        efk.efklist.1.mname="Lock"
        efk.efklist.1.label="Lock"
        efk.efklist.1.status="1"
        efk.efklist.1.action.string="$FLockPhone$"
      />
    </efk>
  <softkey
     softkey.1.label="Lock"
     softkey.1.action="$FLockPhone$"
     softkey.1.enable="1"
     softkey.1.precede="1"
     softkey.1.use.idle="1"
   />

 

then in phone%25BWDEVICEID%25.cfg.template again after features:

 

  <phoneLock/>
   <phoneLock.enabled phoneLock.enabled="1" />
   <phoneLock.authorized.1.description phoneLock.authorized.1.description="Emergency Calls" />
   <phoneLock.authorized.1.value phoneLock.authorized.1.value="999" />
  <phoneLock/>

 

This will set the lock button first on the left before any default buttons and only allow authorized calls to the 999 emergency number while locked....

 

Hope this helps others out :)

 

Cheers

 

Dave

 

 

 

 

View solution in original post

Message 2 of 2