Re: VVX400 Hotdesking UserID Field Encoding

mpalermo@voneto.com · ‎03-30-2015

Hey!

I have setup Hotdesking with several VVX400's and it's working flawlessly. This is not the question.

We are using the extension number for the "UserID" to login to the phone. That's fine, but, that field defaults to "abc" and in order to login to the phone, the users need to change the encoding to "123" (numeric only)... every single time...

Is there a way in the config files to make the default encoding for this field numeric only?

Thanks!

M.

SteffenBaierUK · ‎03-30-2015

Hello M,

welcome to the Polycom Community.

At present this is working as designed

The community's VoIP FAQ therefore contains this post here:

Jan 03, 2013 Question: How can I request a change to the current Polycom SIP / UCS Software?

Resolution: Please check => here <=

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services

<======== Signature / Disclaimer ========>
Please be aware:For questions about the type of support to expect please check here

Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

The title Polycom Employee & Community Manager is an automatic setting within the community and any forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Poly employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and maybe answered on weekends, bank holidays or personal holidays.

mpalermo@voneto.com · ‎03-31-2015

Steffen,

Thank you for the reply. I will pass this up the ladder from me.

M.