Plantronics + Polycom. Now together as Poly Logo

VVX600 update via Lync not automatic


VVX600 update via Lync not automatic

VVX600 - 5.3.0 update pushed via Lync.  The phone will display there is an update available and the user must kick off the update by selecting reboot.  Under details, is shows Inactivity Timeout: 900 seconds but that doesn't seem to do anything because the phone is idle over the weekend and it will still be at the update available selection on Monday.  Sip.ld is not in the config file, so that isn't the problem.  Any ideas?

Message 1 of 3
Polycom Employee & Community Manager

Re: VVX600 update via Lync not automatic

Hello RonR,

welcome back to the Polycom Community.

Our colleague and LYNC expert Jeff Scherz has an excellent guide => here <=


The above includes checking LYNC server logs for the root cause. 


I suggest you work with that and then contact your Polycom reseller if you still have issues so they can raise a case with Polycom support for you.

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services

<======== Signature / Disclaimer ========>
Please be aware:For questions about the type of support to expect please check here

Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

The title Polycom Employee & Community Manager is an automatic setting within the community and any forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Poly employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and maybe answered on weekends, bank holidays or personal holidays.
Message 2 of 3

Re: VVX600 update via Lync not automatic

I found the problem.  The config file the phone used had

up.simplifiedSipcallinfo and up.idleStateview both set to 1.  I removed both entries and now the phones automatically reboot and update after 900 seconds of inactivity. :)

Message 3 of 3