Plantronics + Polycom. Now together as Poly Logo

VX411 Making Calls on its own

KCS
Occasional Visitor

VX411 Making Calls on its own

Model:VVX411
Codec:G711
Mac Address:64:16:7F:3B:EB:F3
Profile Type:Polycom VVX411

 

This device is making calls on its own.

 

Is there a fix for this please?

Message 1 of 2
1 REPLY 1
Polycom Employee & Community Manager

Re: VX411 Making Calls on its own

Hello @KCS,

welcome to the Polycom Community.

Both the community's Must Read First and the community's FAQ reference the basic minimum information a new or follow up post should contain.

This ensures the questions having to be asked are limited and any new or follow up post contains the right amount of details to ensure any voluntary participant within the community does not spend additional time chasing basic information.

As a reminder the basic information asked for:

 

    • Provide the exact Software Version of your Phone

 

    • Provide the Phone Model

 

    • Provide the Call Platform (aka openSIP, Skype for Business, Lync)

 

    • If applicable provide a backup of the phone in question

 

    • If possible provide a => Log <= and either attache them or use the => Code Tag <=. Consult the Troubleshooting Section found within the FAQ if applicable

 

    • If possible provide the MAC Address or Serial of the device

 

    • Provide details if the issue is a day 1 issue or only happened after an upgrade or any other relevant details

 

Your Service Provider / Reseller is Siphone so please work with them to open a ticket.


End Customers are unable to open a ticket directly with Polycom support.

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

Polycom Global Services




<======== Signature / Disclaimer ========>
Please be aware:For questions about the type of support to expect please check here

Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's

Please remember, if you see a post that helped you , and it answers your question, please mark it as an "Accept as Solution".

The title Polycom Employee & Community Manager is an automatic setting within the community and any forum reply or post is based upon my personal experience and does not reflect the opinion or view of my employer.
Poly employee participation within this community is not mandatory and any post or FAQ article provided by myself is done either during my working hours or outside working hours, in my private time, and maybe answered on weekends, bank holidays or personal holidays.
Message 2 of 2