Hi , i have many VXX300 phones and i am trying to configure them statically without provisioning , the only way that i could do it was setting the ip address static , i tried to set provisining setting blank and static option , it sometimes works setting the ip static but on others old models it doesn't work , any idea?
welcome to the Polycom Community.
Both the community's Must Read First and the community's FAQ reference the basic minimum information a new or follow up post should contain.
This ensures the questions having to be asked are limited and any new or follow up post contains the right amount of details to ensure any voluntary participant within the community does not spend additional time chasing basic information.
As a reminder the basic information asked for:
UC Software 4.0.0 or later via the Web Interface Utilities > Phone Backup & Restore > Phone Backup > Phone Backup
Whilst providing these details may not directly impact any possible answer the community can provide, it does enable Polycom to have an overview of the current software used. In addition other details allow us to look up a potential support partners if an issue needs to come into support. It also enables us to verify the entitlement for using features.
Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.
Polycom Global Services