Plantronics + Polycom. Now together as Poly Logo

Visual Plus 2nd Monitor

Highlighted
Occasional Contributor

Visual Plus 2nd Monitor

Hi,
we have Trio 8800 with visual+ can i connect it to 2nd monitor from USB to HDMI adapter through visual+(usb port)?
Message 1 of 3
2 REPLIES 2
Highlighted
Trusted Contributor

Re: Visual Plus 2nd Monitor

Hi @Mohamad,

 

no, that´s not possible nor supported. If you want to use Trio with a solution that supports 2nd monitor, you´ll have to move to Visual Pro or if you have, connect a Group with minimum hardware REV.20.

Message 2 of 3
Highlighted
Polycom Employee & Community Manager

Re: Visual Plus 2nd Monitor

Hello @mshu ,

 

Welcome to the Poly Community.

Both the communities Must Read First and the FAQ reference the basic minimum information a new or follow up post should contain.

This ensures the questions having to be asked are limited and any new or follow up post contains the right amount of details to ensure any voluntary participant within the community does not spend additional time chasing basic information.

As a reminder the basic information asked for:

 

  • Provide the exact Software Version of your Phone
  • Provide the Phone Model
  • Provide the Call Platform (aka openSIP,Teams, Skype for Business Online, Skype for Business on Premise, Lync)
  • Provide details if UC / SIP or ObiEdition
  • Additional Poly Infrastructure (RPRM,PDMS or BToE)
  • If applicable provide a backup of the phone in question

UC Software 4.0.0 or later via the Web Interface Utilities > Phone Backup & Restore > Phone Backup > Phone Backup. Please rename into .TXT or Zip the file to attach.
Since UC Software 5.9.0 simply provide this via the Web Interface Diagnostics > Download Support Information Package

  • If possible provide a Log and either attach them or use the Code Tag.Consult the Troubleshooting Section found within the FAQ if applicable
  • If possible provide the MAC Address or Serial of the device
  • Provide details for example if the issue is a day 1 issue or only happened after an upgrade or any other relevant details
  • For questions around Support please check here

Whilst providing some of these details may not directly impact any possible answer the community can provide, it does enable Poly to have an overview of the current software used. In addition, providing all details at the same time allow us to check logs or look up potential support partners if an issue needs to come into support. It also enables us to verify the entitlement for using features.

 

As explained >here< since Trio UC Software 5.9.0 the Trio can connect additional Visual+ when using Visual+ or VisualPro


Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

----------------

Notice: This community forum is not an official Poly support resource, thus responses from Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge. If you need immediate and/or official assistance please open a service ticket through your proper support channels.
Please also ensure you always check the VoIP , Video Endpoint , Skype for Business , PSTN or RPM FAQ's
Message 3 of 3